On Thu, Nov 22, 2001 at 05:15:11PM +0100, S�bastien Judenherc wrote:
>
> > Then the obvious change you need is to patch Hermit to write to the flash
> > on that board. It's got Intel L28F320 Flash devices in Rev B. Maybe
> L28F320, yes, it is the same on my board.
what about the SDRAM chips? my revC board has
NEC
D4564163G5
-A80-9JF
0011LEU35
if yours are different, you may need to adjust the SDRAM timings on the
hermit startup code. i do recall getting some checksum problems a long time
ago when i was first setting up the board, and tweaking the memory timings
helped.
btw, sebastian, i did try the shoehorn and hermit images you sent me. they
downloaded fine to my board, and i was able to download a kernel image to flash
with no problems. it does seem to be a problem with your hardware.
one thing, when i booted my kernel with your loader, uart2 spit out 'Error: a'
if you use the kernel patch from rolands website, you should be fine. if you
use the latest kernels (which have most of that already merged) you will need
to change the architecture number in the linux.c setup to match the official
cdb89712 number.
regards
--
---------------------------------------------------------------------------
Ray Lehtiniemi <[EMAIL PROTECTED]> <[EMAIL PROTECTED]>
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
