It's pretty basic. Of course the password is blanked out below:
TIMEOUT 5
ABORT 'BUSY'
ABORT 'NO CARRIER'
REPORT 'CONNECT'
"" 'ATZ'
'OK' 'AT&FW1X3C1&D3&K3&Q5S7=60S36=7S46=138S48=7S95=47'
'OK' 'ATDT6880168'
TIMEOUT 25
CONNECT ""
'ame:' 'legaulr'
'ord:' '******'
On Mon, 2 Aug 1999, Davidson, Brett R wrote:
> What does your chat script look like?
>
> -Brett R. Davidson
> 425-965-6612
>
> > ----------
> > From: Randy Legault[SMTP:[EMAIL PROTECTED]]
> > Sent: Sunday, August 01, 1999 10:04 PM
> > To: [EMAIL PROTECTED]
> > Subject: help! chat script fails "Can't get terminal parameters"
> >
> > I've search Howtos, FAQs & the web to no avail. I think I'm really close,
> > but . . .
> >
> > The weird thing is that the chat script works fine when I use it to
> > establish ppp link without diald running.
> >
> > The following results from executing /usr/sbin/diald (1st 6 entries) and
> > trying to use fetchmail to trigger the dialup:
> >
> > Aug 2 00:30:51 zadkiel diald[7850]: Creating FIFO
> > Aug 2 00:30:51 zadkiel diald[7850]: Using fifo /etc/diald/diald.ctl
> > Aug 2 00:30:51 zadkiel diald[7850]: Proxy device established on interface sl0
> > Aug 2 00:30:51 zadkiel diald[7850]: start sl0: SIOCSIFMETRIC: Invalid argument
> > Aug 2 00:30:51 zadkiel diald[7850]: start sl0: SIOCSIFMTU: Invalid argument
> > Aug 2 00:30:52 zadkiel diald[7850]: Diald initial setup completed.
> > Aug 2 00:30:52 zadkiel diald[7850]: FIFO closed
> >
> > Aug 2 00:31:14 zadkiel diald[7850]: Trigger: udp 10.0.0.1/1422
>209.195.95.95/53
> > Aug 2 00:31:14 zadkiel diald[7850]: Calling site 10.0.0.2
> > Aug 2 00:31:15 zadkiel chat[7860]: Can't get terminal parameters: Invalid argument
> > Aug 2 00:31:15 zadkiel diald[7850]: Connect script failed.
> > Aug 2 00:31:15 zadkiel diald[7850]: Closing /dev/ttyS1
> > Aug 2 00:31:16 zadkiel diald[7850]: Delaying 30 seconds before clear to dial.
> >
> > My diald.conf conforms to my repeated reading of the DIALD-EXAMPLES for
> > dynamic ppp:
> >
> > debug 31
> > mode ppp
> > connect "/usr/sbin/chat -v -f /etc/sysconfig/network-scripts/chat-ppp0"
> > device /dev/ttyS1
> > speed 57600
> > modem
> > lock
> > crtscts
> > local 10.0.0.1
> > remote 10.0.0.2
> > dynamic
> > defaultroute
> > mtu 1500
> > mru 1500
> > window 2048
> > accounting-log /var/log/diald.log
> > fifo /etc/diald/diald.ctl
> > include /usr/lib/diald/standard.filter
> >
> > Any ideas appreciated.
> >
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-diald" in
> > the body of a message to [EMAIL PROTECTED]
> >
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
