Hi Thanks //You cannot use /dev/video0 for a budget
do you mean that Twinhav VP1020 cannot used /dev/video0, infact VDR and xawtv tries to used this device and gives an error!!! // xawtv will not work as it is... You will have to use > mplayer and pipe the > output to mplayer... thanks for that, i will check it right now, please if you have more idea don't hesitate to email me. // You can try to use scan to generate your channel > config after creating the > "initial seed" and then szap to the channel you > want... > > > You can test the picture using the "test_dvr" > utility in the test directory of > the "DVB" driver not "dvb-kernel". i have used "szap" before, but i dont know where I can find it now? i dont see the DVB driver on my system, i have patched kernel2.6.0-11, configure, install and then insmod the modules? Thanks for everythings best regards abbas almutawa --- Manu Abraham <[EMAIL PROTECTED]> wrote: > > > in fact, i try everythings just to get this card > > working, after i insmod the "dst" and fail to get > the > > VDR or xawtv to work with, i tried to insmod the > > "CX24110" to see if it works, but nothings happen, > the > > i tried remove the "dst" and insmod it again with > > "DST_TYPE_FLAGS=0", > > "DST_TYPE_FLAGS=1","DST_TYPE_FLAGS=4", but again > > nothings happen and the VDR cannot crab the > > /dev/video0 devices. > > > You cannot use /dev/video0 for a budget card..... > /dev/video0 will work only > for cards that have an onboard MPEG2 decoder ..... > > > xawtv will not work as it is... You will have to use > mplayer and pipe the > output to mplayer... > > I don't have any idea about VDR .... > > > Maybe you can try this script out.... > > > modprobe dvb_core dvb_shutdown_timeout=0 > modprobe video-buf > modprobe bttv i2c_hw=1 card=0x68 > modprobe bt878 > modprobe dst dst_type_flags=4 > modprobe dvb-bt8xx > > > You can try to use scan to generate your channel > config after creating the > "initial seed" and then szap to the channel you > want... > > > You can test the picture using the "test_dvr" > utility in the test directory of > the "DVB" driver not "dvb-kernel". > > I don't have any idea of using VDR.. You might have > to find out ... > > Regards, > Manu > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] > with "unsubscribe linux-dvb" as subject. > __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
