Hi after insmod the following modules successfully
modprobe dvb_core dvb_shutdown_timeout=0 modprobe video-buf modprobe bttv i2c_hw=1 card=0x68 modprobe bt878 modprobe dst dst_type_flags=4 modprobe dvb-bt8xx i tried the test_dvr, szap,..., but all not works it is looking for /dev/dvb/video0, /dev/dvb/demx0, /dev/dvb/frontend0,... but all of them are not exist i have only /dev/video0, /dev/video1, /dev/video2, /dev/video3, /dev/video1394 but when i tried i.e "cat /dev/video0" it gives [EMAIL PROTECTED] dev]# cat video0 cat: video0: No such device [EMAIL PROTECTED] dev]# i dont think that the driver is working!!! i have also. /dev/video/ which contains em8300 em8300_ma em8300_mv em8300_sp but cat them result [EMAIL PROTECTED] video]# cat em8300 cat: em8300: No such device [EMAIL PROTECTED] video]# cat em8300_ma cat: em8300_ma: No such device [EMAIL PROTECTED] video]# i also tried to open some source files like "test_dvr.c" and point it to /dev/video0, but gives "No such device". please, if help me as you can. Thanks best regards abbas --- Manu Abraham <[EMAIL PROTECTED]> wrote: > Hi, > > > //You cannot use /dev/video0 for a budget > > > > do you mean that Twinhav VP1020 cannot used > > /dev/video0, infact VDR and xawtv tries to used > this > > device and gives an error!!! > > > > // xawtv will not work as it is... You will have > to > > use > > > > > > Again i say the same .... you cannot use a budget > card for /dev/video0. That > is why it is called a budget card.. > > > > i have used "szap" before, but i dont know where I > can > > find it now? i dont see the DVB driver on my > system, > > i have patched kernel2.6.0-11, configure, install > and > > then insmod the modules? > > http://www.linuxtv.org > > Regards, > > Manu > > > > > > > > Thanks for everythings > > best regards > > abbas almutawa > > > > --- Manu Abraham <[EMAIL PROTECTED]> wrote: > > > > in fact, i try everythings just to get this > card > > > > working, after i insmod the "dst" and fail to > get > > > > > > the > > > > > > > VDR or xawtv to work with, i tried to insmod > the > > > > "CX24110" to see if it works, but nothings > happen, > > > > > > the > > > > > > > i tried remove the "dst" and insmod it again > with > > > > "DST_TYPE_FLAGS=0", > > > > "DST_TYPE_FLAGS=1","DST_TYPE_FLAGS=4", but > again > > > > nothings happen and the VDR cannot crab the > > > > /dev/video0 devices. > > > > > > You cannot use /dev/video0 for a budget > card..... > > > /dev/video0 will work only > > > for cards that have an onboard MPEG2 decoder > ..... > > > > > > > > > xawtv will not work as it is... You will have to > use > > > mplayer and pipe the > > > output to mplayer... > > > > > > I don't have any idea about VDR .... > > > > > > > > > Maybe you can try this script out.... > > > > > > > > > modprobe dvb_core dvb_shutdown_timeout=0 > > > modprobe video-buf > > > modprobe bttv i2c_hw=1 card=0x68 > > > modprobe bt878 > > > modprobe dst dst_type_flags=4 > > > modprobe dvb-bt8xx > > > > > > > > > You can try to use scan to generate your channel > > > config after creating the > > > "initial seed" and then szap to the channel you > > > want... > > > > > > > > > You can test the picture using the "test_dvr" > > > utility in the test directory of > > > the "DVB" driver not "dvb-kernel". > > > > > > I don't have any idea of using VDR.. You might > have > > > to find out ... > > > > > > Regards, > > > Manu > > > > > > > > > > > > -- > > > Info: > > > To unsubscribe send a mail to > [EMAIL PROTECTED] > > > with "unsubscribe linux-dvb" as subject. > > > > __________________________________ > > Do you Yahoo!? > > New Yahoo! Photos - easier uploading and sharing. > > http://photos.yahoo.com/ > > > > -- > Info: > To unsubscribe send a mail to [EMAIL PROTECTED] > with "unsubscribe linux-dvb" as subject. > __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ -- Info: To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as subject.
