Rajesh wrote on Saturday, June 29, 2002 9:40 AM



> On Fri, Jun 28, 2002 at 09:37:32PM +0530, Dr. Sachin Kale wrote:
>
> >
> >Rajesh wroteon  Friday, June 28, 2002 10:14 AM
> >
> >> On Fri, Jun 28, 2002 at 08:03:17AM +0530, Dr. Sachin Kale wrote:
> >>
> >      i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi,
generic
> >(using VT number 7)
> >
>
>nts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/7
5
> >dpi/"
> >(--) SVGA: PCI: Intel Unknown chipset (0x7125) rev 3, Memory @
> >0xd0000000, 0xd4000000
> >(--) SVGA: GART: allocated 4096K system ram
> >(--) SVGA: chipset:  i810e
>   ^^
>
> Here it looks like i810 is not configured.
> Do you have the following in your /etc/X11/XF86Config file ?
>
> #
**********************************************************************
> # Graphics device section
> #
**********************************************************************
>
> Section "Device"
>     Identifier         "Intel 810"
>     Chipset        "i810e"
>     VideoRam           16384
> EndSection
>
>
> #
**********************************************************************
> # Screen section
> #
**********************************************************************
> # The svga server
> Section "Screen"
>     Driver      "svga"
>     Device      "Intel 810"
>     Monitor     "default"
>     DefaultColorDepth 16
>
>     Subsection "Display"
>         Depth       16
>         Modes       "1024x768"
>     EndSubsection
> EndSection
>
> Assuming your monitor is 15".
>
> >(**) SVGA: videoram: 4096k
> >(**) SVGA: Option "dac_8_bit"
> >(**) SVGA: Using 24 bpp, Depth 24, Color weight: 888
>
> Don't use Dept - 24bppp on i810, change it to Depth 16.

Thanks for response but after doing as you say it still hangs, I dont
know what I am missing, the NHF article that I read says that, i810 &
xfree 3.3.6 can work, but I am not able to do it. I dont know whats
wrong :(

here is the new output of startx -



XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
 If the server is older than 6-12 months, or if your card is newer
 than the above date, look for a newer version before reporting
 problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 1):
      NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
      RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
      GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b,
      ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b,
      ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000,
pvga1,
      wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga,
r128, ati,
      sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
      sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
      tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d,
tvga9000,
      tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680,
tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
      clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
      clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
      clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
      clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
      mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
      oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
      ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
AT24,
      AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
      ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
      ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
      ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
      i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic
(using VT number 7)

XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keycodes: "xfree86"
(**) XKB: types: "default"
(**) XKB: compat: "default"
(**) XKB: symbols: "us(pc102)+us_intl"
(**) XKB: geometry: "pc"
(**) Mouse: type: PS/2, device: /dev/ttyS0, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "i810"
(**) SVGA: Monitor ID: "sam"
(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100d
pi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X
11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fo
nts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75
dpi/"
(--) SVGA: PCI: Intel Unknown chipset (0x7125) rev 3, Memory @
0xd0000000, 0xd4000000
RENDITION: vendor 0x8086 chip 0x7124
RENDITION: vendor 0x8086 chip 0x7125
RENDITION: vendor 0x8086 chip 0x2418
RENDITION: vendor 0x8086 chip 0x2410
RENDITION: vendor 0x8086 chip 0x2411
RENDITION: vendor 0x8086 chip 0x2412
RENDITION: vendor 0x8086 chip 0x2413
RENDITION: vendor 0x8086 chip 0x2415
RENDITION: vendor 0x125d chip 0x2838
(--) SVGA: GART: allocated 4096K system ram
(**) SVGA: chipset:  i810e
(**) SVGA: videoram: 4096k
(**) SVGA: Option "dac_8_bit"
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 163.000 MHz
(--) SVGA: i810e: Removing interlaced mode "1024x768"
(--) SVGA: i810e: Removing interlaced mode "1152x864"
(--) SVGA: i810e: Removing interlaced mode "1280x1024"
(**) SVGA: Mode "640x480": mode clock =  45.800
(**) SVGA: Mode "800x600": mode clock =  50.000
(**) SVGA: Mode "1024x768": mode clock =  65.000
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Intel i810e
(--) SVGA: i810e: MMIO registers at 0xD4000000
(--) SVGA: i810e: Linear framebuffer at 0xD0000000
(--) SVGA: i810e: Using hardware cursor
(--) SVGA: Setting dot clock to 45.8 MHz [ 0x28 0x9 0x30 ] [ 42 11 3 ]
(--) SVGA: chose watermark 0x22006000: (tab.freq 49.0)
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext,
polytext)
(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
xinit:  connection to X server lost.

waiting for X server to shut down






-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
No, I will not fix your computer.
http://thinkgeek.com/sf
_______________________________________________
linux-india-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/linux-india-help

Reply via email to