On Sat, Jun 29, 2002 at 10:08:35PM +0530, Dr. Sachin Kale wrote: > >> Assuming your monitor is 15". >> >> >(**) SVGA: videoram: 4096k >> >(**) SVGA: Option "dac_8_bit" >> >(**) SVGA: Using 24 bpp, Depth 24, Color weight: 888 >> >> Don't use Dept - 24bppp on i810, change it to Depth 16. > >Thanks for response but after doing as you say it still hangs, I dont >know what I am missing, the NHF article that I read says that, i810 & >xfree 3.3.6 can work, but I am not able to do it. I dont know whats >wrong :(
> >here is the new output of startx - > > > >XFree86 Version 3.3.6 / X Window System >(protocol Version 11, revision 0, vendor release 6300) >Release Date: January 8 2000 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) >Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF] >Configured drivers: > SVGA: server for SVGA graphics adaptors (Patchlevel 1): > NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, > RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256, > GeForce DDR, Quadro, ET4000, ET4000W32, ET4000W32i, >ET4000W32i_rev_b, > ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, >ET4000W32p_rev_b, > ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, >pvga1, > wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, >r128, ati, > sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, > sis5598, sis6326, sis530, sis620, sis300, sis630, sis540, >tvga8200lx, > tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, >tvga9000, > tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, >tgui9420dgi, > tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, >tgui9682, > tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, > cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, >cyberblade, > clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, >clgd5430, > clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, >clgd5465, > clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, >clgd7543, > clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, >mga2064w, > mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, >oti067, > oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, >ali2308, > ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, >ark1000pv, > ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, >AT24, > AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, > ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, > ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, > ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, >i740_pci, > i810, i810-dc100, i810e, Voodoo Banshee, Voodoo3, smi, generic >(using VT number 7) > >XF86Config: /usr/X11R6/lib/X11/XF86Config >(**) stands for supplied, (--) stands for probed/default values >(**) XKB: keycodes: "xfree86" >(**) XKB: types: "default" >(**) XKB: compat: "default" >(**) XKB: symbols: "us(pc102)+us_intl" >(**) XKB: geometry: "pc" >(**) Mouse: type: PS/2, device: /dev/ttyS0, buttons: 3 >(**) Mouse: 3 button emulation (timeout: 50ms) >(**) SVGA: Graphics device ID: "i810" >(**) SVGA: Monitor ID: "sam" >(--) SVGA: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted. >(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. >(--) SVGA: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. >(--) SVGA: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. >(--) SVGA: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. >(--) SVGA: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. >(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. >(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. >(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. >(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. >(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. >(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. >(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. >(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. >(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. >(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. >(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. >(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. >(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. >(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. >(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. >(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. >(**) FontPath set to >"/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/lib/X11/fonts/100d >pi/:unscaled,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X >11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fo >nts/misc/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75 >dpi/" >(--) SVGA: PCI: Intel Unknown chipset (0x7125) rev 3, Memory @ >0xd0000000, 0xd4000000 >RENDITION: vendor 0x8086 chip 0x7124 >RENDITION: vendor 0x8086 chip 0x7125 >RENDITION: vendor 0x8086 chip 0x2418 >RENDITION: vendor 0x8086 chip 0x2410 >RENDITION: vendor 0x8086 chip 0x2411 >RENDITION: vendor 0x8086 chip 0x2412 >RENDITION: vendor 0x8086 chip 0x2413 >RENDITION: vendor 0x8086 chip 0x2415 >RENDITION: vendor 0x125d chip 0x2838 >(--) SVGA: GART: allocated 4096K system ram >(**) SVGA: chipset: i810e >(**) SVGA: videoram: 4096k >(**) SVGA: Option "dac_8_bit" >(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565 >(--) SVGA: Maximum allowed dot-clock: 163.000 MHz >(--) SVGA: i810e: Removing interlaced mode "1024x768" >(--) SVGA: i810e: Removing interlaced mode "1152x864" >(--) SVGA: i810e: Removing interlaced mode "1280x1024" >(**) SVGA: Mode "640x480": mode clock = 45.800 >(**) SVGA: Mode "800x600": mode clock = 50.000 >(**) SVGA: Mode "1024x768": mode clock = 65.000 >(--) SVGA: Virtual resolution set to 1024x768 >(--) SVGA: Intel i810e >(--) SVGA: i810e: MMIO registers at 0xD4000000 >(--) SVGA: i810e: Linear framebuffer at 0xD0000000 >(--) SVGA: i810e: Using hardware cursor >(--) SVGA: Setting dot clock to 45.8 MHz [ 0x28 0x9 0x30 ] [ 42 11 3 ] >(--) SVGA: chose watermark 0x22006000: (tab.freq 49.0) >(--) SVGA: Using XAA (XFree86 Acceleration Architecture) >(--) SVGA: XAA: Solid filled rectangles >(--) SVGA: XAA: Screen-to-screen copy >(--) SVGA: XAA: 8x8 color expand pattern fill >(--) SVGA: XAA: Indirect CPU to screen color expansion (imagetext, >polytext) >(--) SVGA: XAA: Using 8 128x128 areas for pixmap caching >(--) SVGA: XAA: Caching tiles and stipples >(--) SVGA: XAA: Horizontal and vertical lines and segments >xinit: connection to X server lost. > >waiting for X server to shut down Why it shows 'connection to X server lost' ? What does the log say in /var/log/ ? Only thing I can suggest is delete everything from /tmp and restart X and see. rm -rf /tmp/* startx Peace -- Rajesh : ####[ Linux One Stanza Tip (LOST) ]########################### Sub : Linux Commands (#4) LOST #056 For a newbie introduction to Linux commands and shotcuts visit URL: http://sunsite.dk/linux-newbie/Linux_commands.htm ####<[EMAIL PROTECTED]>################################## : ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
