Dave Davey <[EMAIL PROTECTED]> writes:
> Looking at /proc shows that the line discipline flag bits are _not_
> being set when lpd starts. This could be similar to the crmod problem
> some have reported with phones. By going to the unix-lpr lpd which forks
> stty to set line characteristics I have things working again, but I put
> this in the "workaround" basket.
So the problems is the line discipline settings are set by another process,
and for some reason the IrCOMM instance is closed between the two
processes. Hmm, I'll check it out!
> A further comment about the printer. Printing complex pages (fancy fonts
> and ghostscript) is _much_ slower using the IR port on the BJC-80 than
> using a parallel port and a cable. Is this a hardware limitation or does
> it mean there is room for better IR code? I only use linux on my
> laptop so I cannot make the IR/cable comparison in other environments.
Did you see my previous mail about speeding up IrLPT?
-- Dag
--
/ Dag Brattli | The Linux-IrDA Project /
// University of Tromsoe, Norway | Infrared communication for Linux //
/// http://www.cs.uit.no/~dagb | http://www.cs.uit.no/linux-irda/ ///
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
