Dag Brattli wrote:
> I've just put out patch-2.2.12-irda3 for testing. This patch includes _all_
> the latest changes, so you must apply it to a clean 2.2.12 kernel.
>
> Please rapport:
>
> o If you can find a device that works with a clean 2.2.12 but not
> with this patch
>
no
(I only have a printer though, see below)
>
> o If you can find a device that doesn't work with a clean 2.2.12, but works
> after applying this patch.
>
yes
(vaio 737, HPlaserjet6P)
printing long files under 2.2.12 fails and printing a file with 2043 byte
length crashes my system.
(both using irport and using the serial driver -> problem with irlpt?)
printing under 2.2.12+patch-2.2.12-irda3 works fine (files up to 493k tested,
no LFCR translation does occur,
I had problems with LFCR translation in previous patches)
Both the serial driver + irattach (approx. 77 kbit/sec measured)
and irport (approx. 41kbit/sec measured)
work.
Thanks,
Joerg Schmid
[EMAIL PROTECTED]
MPI fuer Festkoerperforschung
Stuttgart
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
