These device trees add support for the TS-4600 by Technologic Systems.

More details here:
  http://wiki.embeddedarm.com/wiki/TS-4600

Signed-off-by: Sebastien Bourdelin <sebastien.bourde...@savoirfairelinux.com>
---
 arch/arm/boot/dts/Makefile                 |  2 +
 arch/arm/boot/dts/imx28-ts4600-common.dtsi | 78 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx28-ts4600-rev-a.dts   | 22 +++++++++
 arch/arm/boot/dts/imx28-ts4600-rev-b.dts   | 22 +++++++++
 4 files changed, 124 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx28-ts4600-common.dtsi
 create mode 100644 arch/arm/boot/dts/imx28-ts4600-rev-a.dts
 create mode 100644 arch/arm/boot/dts/imx28-ts4600-rev-b.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c558ba7..5a79fab 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -466,6 +466,8 @@ dtb-$(CONFIG_ARCH_MXS) += \
        imx28-m28cu3.dtb \
        imx28-m28evk.dtb \
        imx28-sps1.dtb \
+       imx28-ts4600-rev-a.dtb \
+       imx28-ts4600-rev-b.dtb \
        imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += \
        ste-nomadik-s8815.dtb \
diff --git a/arch/arm/boot/dts/imx28-ts4600-common.dtsi 
b/arch/arm/boot/dts/imx28-ts4600-common.dtsi
new file mode 100644
index 0000000..04bd5a5
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-ts4600-common.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourde...@savoirfairelinux.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+       compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+       apb@80000000 {
+               apbh@80000000 {
+                       ssp0: ssp@80010000 {
+                               compatible = "fsl,imx28-mmc";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&mmc0_4bit_pins_a
+                                            &mmc0_sck_cfg
+                                            &en_sd_pwr>;
+                               broken-cd = <1>;
+                               bus-width = <4>;
+                               vmmc-supply = <&reg_vddio_sd0>;
+                               status = "okay";
+                       };
+
+                       pinctrl@80018000 {
+                               pinctrl-names = "default";
+
+                               en_sd_pwr: en_sd_pwr {
+                                       fsl,pinmux-ids = <
+                                               MX28_PAD_PWM3__GPIO_3_28
+                                       >;
+                                       fsl,drive-strength = <MXS_DRIVE_4mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_DISABLE>;
+                               };
+
+                       };
+               };
+
+               apbx@80040000 {
+                       pwm: pwm@80064000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pwm2_pins_a>;
+                               status = "okay";
+                       };
+
+                       duart: serial@80074000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&duart_pins_a>;
+                               status = "okay";
+                       };
+               };
+       };
+
+       regulators {
+               compatible = "simple-bus";
+
+               reg_vddio_sd0: vddio-sd0 {
+                       compatible = "regulator-fixed";
+                       regulator-name = "vddio-sd0";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-boot-on;
+                       gpio = <&gpio3 28 0>;
+               };
+       };
+
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600-rev-a.dts 
b/arch/arm/boot/dts/imx28-ts4600-rev-a.dts
new file mode 100644
index 0000000..e8cb729
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-ts4600-rev-a.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourde...@savoirfairelinux.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx28-ts4600-common.dtsi"
+
+/ {
+       model = "Technologic Systems i.MX28 TS-4600 Rev A";
+
+       memory {
+               reg = <0x40000000 0x08000000>;   /* 128MB */
+       };
+
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600-rev-b.dts 
b/arch/arm/boot/dts/imx28-ts4600-rev-b.dts
new file mode 100644
index 0000000..a115f83
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-ts4600-rev-b.dts
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourde...@savoirfairelinux.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx28-ts4600-common.dtsi"
+
+/ {
+       model = "Technologic Systems i.MX28 TS-4600 Rev B";
+
+       memory {
+               reg = <0x40000000 0x10000000>;   /* 256MB */
+       };
+
+};
-- 
2.10.2

Reply via email to