With DT support for mv643xx_eth board specific init for some boards now
is unneccessary. Remove those board files, Kconfig entries, and
corresponding entries in kirkwood_defconfig.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
the lock-up is not caused by accessing clock gating registers but rather
non-existent device registers. This will be addressed by dtsi separation
for kirkwood and bobcat SoC variants.
Changelog:
v3->v4:
- remove more boards that don't require board specific setup
Cc: David Miller <da...@davemloft.net>
Cc: Lennert Buytenhek <buyt...@wantstofly.org>
Cc: Jason Cooper <ja...@lakedaemon.net>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Cc: net...@vger.kernel.org
Cc: linux-arm-ker...@lists.infradead.org
Cc: linuxppc-...@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/configs/kirkwood_defconfig | 16 ----
arch/arm/mach-kirkwood/Kconfig | 117 -------------------------
arch/arm/mach-kirkwood/Makefile | 16 ----
arch/arm/mach-kirkwood/board-dnskw.c | 7 --
arch/arm/mach-kirkwood/board-dockstar.c | 32 -------
arch/arm/mach-kirkwood/board-dreamplug.c | 35 --------
arch/arm/mach-kirkwood/board-dt.c | 62 +------------
arch/arm/mach-kirkwood/board-goflexnet.c | 34 -------
arch/arm/mach-kirkwood/board-guruplug.c | 33 -------
arch/arm/mach-kirkwood/board-ib62x0.c | 29 ------
arch/arm/mach-kirkwood/board-iconnect.c | 10 ---
arch/arm/mach-kirkwood/board-iomega_ix2_200.c | 34 -------
arch/arm/mach-kirkwood/board-km_kirkwood.c | 44 ----------
arch/arm/mach-kirkwood/board-lsxl.c | 16 ----
arch/arm/mach-kirkwood/board-mplcec4.c | 14 ---
arch/arm/mach-kirkwood/board-ns2.c | 35 --------
arch/arm/mach-kirkwood/board-openblocks_a6.c | 26 ------
arch/arm/mach-kirkwood/board-readynas.c | 6 --
arch/arm/mach-kirkwood/board-ts219.c | 13 ---
arch/arm/mach-kirkwood/board-usi_topkick.c | 29 ------
20 files changed, 1 insertion(+), 607 deletions(-)
delete mode 100644 arch/arm/mach-kirkwood/board-dockstar.c
delete mode 100644 arch/arm/mach-kirkwood/board-dreamplug.c
delete mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c
delete mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
delete mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c
delete mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c
delete mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c
delete mode 100644 arch/arm/mach-kirkwood/board-ns2.c
delete mode 100644 arch/arm/mach-kirkwood/board-openblocks_a6.c
delete mode 100644 arch/arm/mach-kirkwood/board-usi_topkick.c
diff --git a/arch/arm/configs/kirkwood_defconfig
b/arch/arm/configs/kirkwood_defconfig
index a1d8252..540ca51 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -30,27 +30,11 @@ CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
-CONFIG_MACH_CLOUDBOX_DT=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_DOCKSTAR_DT=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_GOFLEXNET_DT=y
-CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_ICONNECT_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
-CONFIG_MACH_IOMEGA_IX2_200_DT=y
-CONFIG_MACH_KM_KIRKWOOD_DT=y
CONFIG_MACH_LSXL_DT=y
CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_LITE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
-CONFIG_MACH_NETSPACE_MINI_V2_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_OPENBLOCKS_A6_DT=y
CONFIG_MACH_READYNAS_DT=y
-CONFIG_MACH_TOPKICK_DT=y
CONFIG_MACH_TS219_DT=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_PREEMPT=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 7509a89..c2fd30b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -146,13 +146,6 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
-config MACH_CLOUDBOX_DT
- bool "LaCie CloudBox NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- CloudBox NAS, using Flattened Device Tree.
-
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -161,69 +154,6 @@ config MACH_DLINK_KIRKWOOD_DT
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
-config MACH_DOCKSTAR_DT
- bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_DREAMPLUG_DT
- bool "Marvell DreamPlug (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
- bool "Seagate GoFlex Net (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Seagate GoFlex Net (Flattened Device Tree).
-
-config MACH_GURUPLUG_DT
- bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Marvell GuruPlug Reference Board (Flattened Device Tree).
-
-config MACH_IB62X0_DT
- bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
- Flattened Device Tree.
-
-config MACH_ICONNECT_DT
- bool "Iomega Iconnect (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here to enable Iomega Iconnect support.
-
-config MACH_INETSPACE_V2_DT
- bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Internet Space v2 NAS, using Flattened Device Tree.
-
-config MACH_IOMEGA_IX2_200_DT
- bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Iomega StorCenter ix2-200 (Flattened Device Tree).
-
-config MACH_KM_KIRKWOOD_DT
- bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-
config MACH_LSXL_DT
bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -239,39 +169,6 @@ config MACH_MPLCEC4_DT
Say 'Y' here if you want your kernel to support the
MPL CEC4 (Flattened Device Tree).
-config MACH_NETSPACE_LITE_V2_DT
- bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Lite v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MAX_V2_DT
- bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Max v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MINI_V2_DT
- bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space Mini v2 NAS using Flattened Device Tree.
-
- This board is embedded in a product named CloudBox, which
- provides automatic backup on a 100GB cloud storage. This
- should not confused with a more recent LaCie NAS also named
- CloudBox. For this last, the disk capacity is 1TB or above.
-
-config MACH_NETSPACE_V2_DT
- bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the LaCie
- Network Space v2 NAS, using Flattened Device Tree.
-
config MACH_NSA310_DT
bool "ZyXEL NSA-310 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -280,13 +177,6 @@ config MACH_NSA310_DT
Say 'Y' here if you want your kernel to support the
ZyXEL NSA-310 board (Flattened Device Tree).
-config MACH_OPENBLOCKS_A6_DT
- bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- Plat'Home OpenBlocks A6 (Flattened Device Tree).
-
config MACH_READYNAS_DT
bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -296,13 +186,6 @@ config MACH_READYNAS_DT
Say 'Y' here if you want your kernel to support the
NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
-config MACH_TOPKICK_DT
- bool "USI Topkick (Flattened Device Tree)"
- select ARCH_KIRKWOOD_DT
- help
- Say 'Y' here if you want your kernel to support the
- USI Topkick, using Flattened Device Tree
-
config MACH_TS219_DT
bool "Device Tree for QNAP TS-11X, TS-21X NAS"
select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e1f3735..8e7fa4f 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -20,25 +20,9 @@ obj-$(CONFIG_MACH_TS219) += ts219-setup.o
tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
-obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
-obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
-obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o
-obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
-obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
-obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o
-obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o
obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o
-obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c
b/arch/arm/mach-kirkwood/board-dnskw.c
index a1aa87f..2af7a95 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,14 +14,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
@@ -36,8 +31,6 @@ static void __init dnskw_gpio_register(unsigned gpio, char
*name, int def)
void __init dnskw_init(void)
{
- kirkwood_ge00_init(&dnskw_ge00_data);
-
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c
b/arch/arm/mach-kirkwood/board-dockstar.c
deleted file mode 100644
index d7196db..0000000
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-dockstar.c
- *
- * Seagate FreeAgent Dockstar Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coo...@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init dockstar_dt_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&dockstar_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c
b/arch/arm/mach-kirkwood/board-dreamplug.c
deleted file mode 100644
index 0903242..0000000
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <ja...@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init dreamplug_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&dreamplug_ge00_data);
- kirkwood_ge01_init(&dreamplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dt.c
b/arch/arm/mach-kirkwood/board-dt.c
index 8db388a..e9c444c 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -104,86 +104,26 @@ static void __init kirkwood_dt_init(void)
kexec_reinit = kirkwood_enable_pcie;
#endif
- if (of_machine_is_compatible("globalscale,dreamplug"))
- dreamplug_init();
-
- if (of_machine_is_compatible("globalscale,guruplug"))
- guruplug_dt_init();
-
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
- if (of_machine_is_compatible("iom,iconnect"))
- iconnect_init();
-
- if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
- ib62x0_init();
-
if (of_machine_is_compatible("qnap,ts219"))
qnap_dt_ts219_init();
- if (of_machine_is_compatible("seagate,dockstar"))
- dockstar_dt_init();
-
- if (of_machine_is_compatible("seagate,goflexnet"))
- goflexnet_init();
-
if (of_machine_is_compatible("buffalo,lsxl"))
lsxl_init();
- if (of_machine_is_compatible("iom,ix2-200"))
- iomega_ix2_200_init();
-
- if (of_machine_is_compatible("keymile,km_kirkwood"))
- km_kirkwood_init();
-
- if (of_machine_is_compatible("lacie,cloudbox") ||
- of_machine_is_compatible("lacie,inetspace_v2") ||
- of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_max_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2") ||
- of_machine_is_compatible("lacie,netspace_v2"))
- ns2_init();
-
if (of_machine_is_compatible("mpl,cec4"))
mplcec4_init();
if (of_machine_is_compatible("netgear,readynas-duo-v2"))
netgear_readynas_init();
- if (of_machine_is_compatible("plathome,openblocks-a6"))
- openblocks_a6_init();
-
- if (of_machine_is_compatible("usi,topkick"))
- usi_topkick_init();
-
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
}
static const char * const kirkwood_dt_board_compat[] = {
- "globalscale,dreamplug",
- "globalscale,guruplug",
- "dlink,dns-320",
- "dlink,dns-325",
- "iom,iconnect",
- "raidsonic,ib-nas62x0",
- "qnap,ts219",
- "seagate,dockstar",
- "seagate,goflexnet",
- "buffalo,lsxl",
- "iom,ix2-200",
- "keymile,km_kirkwood",
- "lacie,cloudbox",
- "lacie,inetspace_v2",
- "lacie,netspace_lite_v2",
- "lacie,netspace_max_v2",
- "lacie,netspace_mini_v2",
- "lacie,netspace_v2",
- "mpl,cec4",
- "netgear,readynas-duo-v2",
- "plathome,openblocks-a6",
- "usi,topkick",
- "zyxel,nsa310",
+ "marvell,kirkwood",
NULL
};
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c
b/arch/arm/mach-kirkwood/board-goflexnet.c
deleted file mode 100644
index 9db979a..0000000
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <ja...@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-goflexnet.c
- *
- * Seagate GoFlext Net Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coo...@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init goflexnet_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&goflexnet_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c
b/arch/arm/mach-kirkwood/board-guruplug.c
deleted file mode 100644
index a857163..0000000
--- a/arch/arm/mach-kirkwood/board-guruplug.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-guruplug.c
- *
- * Marvell Guruplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init guruplug_dt_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&guruplug_ge00_data);
- kirkwood_ge01_init(&guruplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c
b/arch/arm/mach-kirkwood/board-ib62x0.c
deleted file mode 100644
index 9a857ae..0000000
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Baatz <gmbno...@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ib62x0_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&ib62x0_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c
b/arch/arm/mach-kirkwood/board-iconnect.c
index c8ebde4..fcaf136 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -11,18 +11,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iconnect_init(void)
-{
- kirkwood_ge00_init(&iconnect_ge00_data);
-}
-
static int __init iconnect_pci_init(void)
{
if (of_machine_is_compatible("iom,iconnect"))
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
deleted file mode 100644
index e5f7041..0000000
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
- *
- * Iomega StorCenter ix2-200
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_NONE,
- .speed = SPEED_1000,
- .duplex = DUPLEX_FULL,
-};
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iomega_ix2_200_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
- kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c
b/arch/arm/mach-kirkwood/board-km_kirkwood.c
deleted file mode 100644
index 44e4605..0000000
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
- * Valentin Longchamp <valentin.longch...@keymile.com>
- *
- * arch/arm/mach-kirkwood/board-km_kirkwood.c
- *
- * Keymile km_kirkwood Reference Desing Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init km_kirkwood_init(void)
-{
- struct clk *sata_clk;
- /*
- * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
- * SATA bits (14-15) of the Clock Gating Control Register. Since these
- * devices are also not present in this variant, their clocks get
- * disabled because unused when clk_disable_unused() gets called.
- * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
- */
- sata_clk = clk_get_sys("sata_mv.0", "0");
- if (!IS_ERR(sata_clk))
- sata_clk->flags |= CLK_IGNORE_UNUSED;
- sata_clk = clk_get_sys("sata_mv.0", "1");
- if (!IS_ERR(sata_clk))
- sata_clk->flags |= CLK_IGNORE_UNUSED;
-
- kirkwood_ge00_init(&km_kirkwood_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c
b/arch/arm/mach-kirkwood/board-lsxl.c
index 4ec8b7a..3dc0929 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -14,17 +14,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
/*
* On the LS-XHL/LS-CHLv2, the shutdown process is following:
* - Userland monitors key events until the power switch goes to off position
@@ -40,13 +31,6 @@ static void lsxl_power_off(void)
void __init lsxl_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
-
- kirkwood_ge00_init(&lsxl_ge00_data);
- kirkwood_ge01_init(&lsxl_ge01_data);
-
/* register power-off method */
pm_power_off = lsxl_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c
b/arch/arm/mach-kirkwood/board-mplcec4.c
index 7d6dc66..dd1f655 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -11,24 +11,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
#include "common.h"
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(2),
-};
-
void __init mplcec4_init(void)
{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&mplcec4_ge00_data);
- kirkwood_ge01_init(&mplcec4_ge01_data);
kirkwood_pcie_init(KW_PCIE0);
}
diff --git a/arch/arm/mach-kirkwood/board-ns2.c
b/arch/arm/mach-kirkwood/board-ns2.c
deleted file mode 100644
index f8f6605..0000000
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright 2012 (C), Simon Guinot <simon.gui...@sequanux.org>
- *
- * arch/arm/mach-kirkwood/board-ns2.c
- *
- * LaCie Network Space v2 board (and parents) initialization for drivers
- * not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ns2_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- if (of_machine_is_compatible("lacie,cloudbox") ||
- of_machine_is_compatible("lacie,netspace_lite_v2") ||
- of_machine_is_compatible("lacie,netspace_mini_v2"))
- ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
- kirkwood_ge00_init(&ns2_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c
b/arch/arm/mach-kirkwood/board-openblocks_a6.c
deleted file mode 100644
index b11d8fd..0000000
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2012 Nobuhiro Iwamatsu <iwama...@nigauri.org>
- *
- * arch/arm/mach-kirkwood/board-openblocks_a6.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init openblocks_a6_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&openblocks_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-readynas.c
b/arch/arm/mach-kirkwood/board-readynas.c
index fb42c20..3ab3e0e 100644
--- a/arch/arm/mach-kirkwood/board-readynas.c
+++ b/arch/arm/mach-kirkwood/board-readynas.c
@@ -13,16 +13,10 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <mach/kirkwood.h>
#include "common.h"
-static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
void __init netgear_readynas_init(void)
{
- kirkwood_ge00_init(&netgear_readynas_ge00_data);
kirkwood_pcie_init(KW_PCIE0);
}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c
b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..854d448 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -18,27 +18,14 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "tsx1x-common.h"
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(8),
-};
-
void __init qnap_dt_ts219_init(void)
{
- u32 dev, rev;
-
- kirkwood_pcie_id(&dev, &rev);
- if (dev == MV88F6282_DEV_ID)
- qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
- kirkwood_ge00_init(&qnap_ts219_ge00_data);
-
pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c
b/arch/arm/mach-kirkwood/board-usi_topkick.c
deleted file mode 100644
index 1cc04ec..0000000
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright 2012 (C), Jason Cooper <ja...@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-usi_topkick.c
- *
- * USI Topkick Init for drivers not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init usi_topkick_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- kirkwood_ge00_init(&topkick_ge00_data);
-}
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
