With DT support for mv643xx_eth we do not need legacy platform_data based setup for DT enabled boards. This patch removes eth setup for all orion5x DT board files.
Signed-off-by: Sebastian Hesselbarth <[email protected]> --- Cc: David Miller <[email protected]> Cc: Lennert Buytenhek <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] --- arch/arm/mach-orion5x/edmini_v2-setup.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 1476155..d9de926 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -24,7 +24,6 @@ #include <linux/pci.h> #include <linux/irq.h> #include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> #include <linux/leds.h> #include <linux/gpio_keys.h> #include <linux/input.h> @@ -96,14 +95,6 @@ static struct platform_device edmini_v2_nor_flash = { }; /***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data edmini_v2_eth_data = { - .phy_addr = 8, -}; - -/***************************************************************************** * RTC 5C372a on I2C bus ****************************************************************************/ @@ -152,7 +143,6 @@ void __init edmini_v2_init(void) * Configure peripherals. */ orion5x_ehci0_init(); - orion5x_eth_init(&edmini_v2_eth_data); mvebu_mbus_add_window("devbus-boot", EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
