On Sun, Aug 14, 2005 at 12:08:42PM +0100, Daniel Drake wrote: > CaT wrote: > >1. Alan Cox's IDE driver that was included in his ac patchset, which > > seems to have died at 2.6.11ac7. > >2. A brief visit from a SCSI IDE driver in Andrew Mortons mm patchset. > > It lived a brief but noted life before being taken out without any > > reason (that I spotted) in 2.6.12-rc4-mm1 > > Alan's driver has been merged into 2.6.13. You can get the up-to-date
Wooooooooooooooooooooooooooo! > patches here: > > http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/2315_ide-no-lba.patch > http://dev.gentoo.org/~dsd/genpatches/trunk/2.6.12/4345_it8212.patch Didn't use these patches. Just went to 13-rc6 for now to test. All works as before with the following errors on bootup: [227523.229512] hda: max request size: 128KiB [227523.229557] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, BUG [227523.229631] hda: cache flushes not supported [227523.229932] hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error } [227523.230905] hda: recal_intr: error=0x04 { DriveStatusError } [227523.230952] ide: failed opcode was: unknown [227524.379085] hda1 [227524.379710] hdc: max request size: 128KiB [227524.379752] hdc: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, BUG [227524.379825] hdc: cache flushes not supported [227524.379991] hdc:hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error } [227524.380702] hdc: recal_intr: error=0x04 { DriveStatusError } [227524.380748] ide: failed opcode was: unknown [227525.536757] hdc1 hdc2 /dev/hda: Model=ST3200822A, FwRev=3.01, SerialNo=3LJ22Y8F Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16 CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455 IORDY=on/off PIO modes: pio0 pio1 pio2 DMA modes: mdma0 mdma1 mdma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: * signifies the current active mode /dev/hdc: Model=IC35L060AVV207-0, FwRev=V22OA63A, SerialNo=VNVB01G2RAK8XH Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=120103200 IORDY=on/off PIO modes: pio0 pio1 pio2 DMA modes: mdma0 mdma1 mdma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a: * signifies the current active mode -- "To the extent that we overreact, we proffer the terrorists the greatest tribute." - High Court Judge Michael Kirby - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
