Hi,
I used whatever version came with my install (redhat 5.2) ran the
setup program (can't remember which one), which got it running in
320x200, and then edited the XF86config file using some paramaters
(mainly clocks and some modelines) that I found at the linux on laptop
home pages,
cheers
Johann
[EMAIL PROTECTED] wrote:
>
> Did you Upgrade XFree86 with rpms or compile it?
>
> If you compiled it try the --nodeps option. This may solve your problem or
> just create another :-p
>
> On 23-Feb-99 Michael Stearne wrote:
> > I have a Neomagic display for an HP Omnibook 2100 with Redhat 5.0. As
> > far as I can tell Redhat 5.0 comes with XFree86 3.2. In the Linux on
> > Laptops HOWTO for my computer it says my card is not supported by
> > XFree86 yet and I have to go to http://PrecisionInsight.com to get a
> > driver. I went there and got the driver and went to install it (rpm -ivh
> > XFCom......rpm) and the message I got from it was
> > XFCom.... requires XFree86 >= 3.3.2. Fine. So I went to xfree86 org and
> > got the required files for the 3.3.3 release. I ran the preinst.sh
> > script it was OK, and then I ran the postinst.sh script and it ran OK.
> > But then I went back to install the
> > rpm -ivh XFCom......rpm
> > and got
> > XFCom.... requires XFree86 >= 3.3.2 again.
> >
> > Did I not install the XFree86 version correctly? I only ran preinst and
> > postinst is there a step in between that I missed or why is this new
> > version not recognized?
> >
> > Thanks,
> > Michael Stearne
>
> ----------------------------------
> E-Mail: [EMAIL PROTECTED]
> Date: 24-Feb-99
> Time: 04:05:43
>
> This message was sent by XFMail
> ----------------------------------
--
Johann Kwiatkowski
Spot The Dog Graphics
P.O. Box 79, Moorooka,
Qld, Australia, 4105
mobile 0418 797 419
email: [EMAIL PROTECTED] or
email: [EMAIL PROTECTED]
begin: vcard
fn: s142433
n: ;s142433
adr: P.O. Box 79, Moorooka;;;Brisbane;Queensland;4105;Australia
email;internet: [EMAIL PROTECTED]
tel;work: 61 7 0418 797 419
x-mozilla-cpt: ;0
x-mozilla-html: FALSE
version: 2.1
end: vcard
