Howdy, Y'all:
I've been trying to get networking running on my
Slackware v7.0.0 install on my k6-2-266, 96 Megabyte RAM;
dual booting with windows98.
I have edited /etc/rc.inet1 with my IP address and bc-address:
192.168.1.2 & 192.168.1.255.
I have edited /etc/modules.conf:
alais net-pf-4 off #original: OBTW, what does this mean?
alias net-pf-5 off #original: OBTW, what does this mean?
alias ne io=0x2a0 irq=10 #<-- added line. ? that's a decimal ten right?
# The NIC is a Macromate MN220PCT which I have EZCFG.EXE'd
# to NE2000 mode with the above IO/IRQ and it works under
# winders98.
I have edited /etc/resolv.conf & hosts, but I don't think we are there,
yet. ;-)
I've compiled a kernel with lots of modules except my boot media.
I have 'make dep clean zImage zdisk modules modules_install'
seemingly withour error.
I see lots of 'unresolved sysbols' when booting.
If I:
ifconfig eth0
eth0: error fetching interface information: Device not found.
If I:
insmod ne
/lib/modules/2.2.13/net/ne.o: unresolved symbol ei_open
" ethdev_init
" and about 4 more lines
I did something somewhere while trying to get this NIC to work
with isapnp, cause when the kernel boots I see this message:
"don't know what to do with IRQ 10 on or around line 22".
I wonder what file I edited to cause this. Hmmmm.
I'm posting my .config file to http:/gelm.net/config.txt
is case it will help you help me. :-|
Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.linux-learn.org/faqs
