Yeah, I tried OMSA, but for the life of me could not get it to read anything from the IPMI/BIOS interfaces. No idea why. I may just have to reboot and go into the BIOS manually and see what I can see there.
Thanks! On 12/08/10 13:49, Bond Masuda wrote: > Have you checked the fan speeds? Are they at full throttle? I don't know > much about the R910, but usually you can get fan speed readings from OMSA. > > -----Original Message----- > From: linux-poweredge-boun...@dell.com > [mailto:linux-poweredge-boun...@dell.com] On Behalf Of Erich Weiler > Sent: Wednesday, December 08, 2010 1:40 PM > To: Ryan Cox > Cc: linux-poweredge@dell.com > Subject: Re: R910/Linux CPU Heat Problems? > >> Just so you know, the kernel is merely responding to interrupts from the >> processor cores themselves saying they are over temperature. The cores >> have their thresholds set and the kernel can't and doesn't mess with >> them. If the kernel reports the processors are hot, the processors are >> actually hot. > > Ah, good to know. It may be that the air is simply not cool enough in > the datacenter, but this would be the first time I've ever seen this > with any of our servers. I'll double check the screws and fans and see > if that might be an issue... > > _______________________________________________ > Linux-PowerEdge mailing list > Linux-PowerEdge@dell.com > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > Please read the FAQ at http://lists.us.dell.com/faq > _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
