> mapped IOAPIC to ffffd000 (fec00000)
> Detected 448981728 Hz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 447.28 BogoMIPS
> Memory: 647148k/655360k available (1020k kernel code, 420k reserved, 6708k data,
> 64k init)
> Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> mtrr: v1.35 (19990512) Richard Gooch ([EMAIL PROTECTED])
> per-CPU timeslice cutoff: 100.21 usecs.
> CPU1: Intel Pentium II (Deschutes) stepping 02
> calibrating APIC timer ...
> ..... CPU clock speed is 448.9284 MHz.
> ..... system bus clock speed is 99.7616 MHz.
> Booting processor 0 eip 2000
> Calibrating delay loop... 447.28 BogoMIPS
> OK.
> CPU0: Intel Pentium II (Deschutes) stepping 02
> Total of 2 processors activated (894.57 BogoMIPS).
> enabling symmetric IO mode... ...done.
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC pin 0, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
> 32, 33, 34 not connected.
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> ...trying to set up timer as ExtINT... .. (found pin 0) ... works.
> number of MP IRQ sources: 16.
> number of IO-APIC registers: 35.
> testing the IO APIC.......................
> .... register #00: 00000000
> ....... : physical APIC id: 00
> .... register #01: 00220011
> ....... : max redirection entries: 0022
> WARNING: unexpected IO-APIC, please mail
> to [EMAIL PROTECTED]
> ....... : IO APIC version: 0011
> .... register #02: 00000000
> ....... : arbitration: 00
> .... IRQ redirection table:
I have the same error on a quad-Xeon-450. No problem here...
--
Markus Doehr
IT Admin
AUBI Baubeschlaege GmbH
Tel.: +49 6503 917 152
Fax : +49 6503 917 190
[EMAIL PROTECTED]
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
