Hello, appended below is the dmesg from our brand new system,
it contains a message with a request to email you,
so here it is.
The hardware is a Compaq ProLiant 1600, with dual
Pentium IIs at 450 MHz.
The O/S for now is Linux 2.2.13-7mdksmp (distribution:
Mandrake 6.1b). This was installed by a third party
reseller who is not very knowledgeable about Linux.
It is my intention to reinstall Linux at some point
but for now that's what we have.
Let me know if you require further info. And also,
is there an online documentation source (like a web
page) for the Linux SMP project?
Regards,
Rich Urena
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[EMAIL PROTECTED]
[ dmesg starts here ]
Linux version 2.2.13-7mdksmp ([EMAIL PROTECTED]) (gcc version 2.95.1
19990816 (release)) #1 SMP Wed Sep 15 16:38:50 CEST 1999
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 448813154 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 447.28 BogoMIPS
Memory: 322244k/327680k available (1100k kernel code, 424k reserved, 3512k data, 72k
init)
VFS: Diskquotas version dquot_6.4.0 initialized
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
per-CPU timeslice cutoff: 100.18 usecs.
CPU1: Intel Pentium II (Deschutes) stepping 02
calibrating APIC timer ...
..... CPU clock speed is 448.8259 MHz.
..... system bus clock speed is 99.7388 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 447.28 BogoMIPS
OK.
CPU0: Intel Pentium II (Deschutes) stepping 02
Total of 2 processors activated (894.57 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC pin 0, 5, 9, 10, 11WARNING: ASSIGN_IRQ_VECTOR wrapped back to 52
, 31, 32, 33, 34 not connected.
number of MP IRQ sources: 39.
number of IO-APIC registers: 35.
testing the IO APIC.......................
.... register #00: 00000000
....... : physical APIC id: 00
.... register #01: 00220011
....... : max redirection entries: 0022
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 1 0 0 0 0 0 0 00
06 000 00 0 0 0 0 0 1 1 71
07 000 00 0 0 0 0 0 1 1 79
08 000 00 0 0 0 0 0 1 1 81
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 89
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 91
0f 000 00 0 0 0 0 0 1 1 99
10 0FF 0F 1 1 0 1 0 1 1 A1
11 0FF 0F 1 1 0 1 0 1 1 A9
12 0FF 0F 1 1 0 1 0 1 1 B1
13 0FF 0F 1 1 0 1 0 1 1 B9
14 0FF 0F 1 1 0 1 0 1 1 C1
15 0FF 0F 1 1 0 1 0 1 1 C9
16 0FF 0F 1 1 0 1 0 1 1 D1
17 0FF 0F 1 1 0 1 0 1 1 D9
18 0FF 0F 1 1 0 1 0 1 1 E1
19 0FF 0F 1 1 0 1 0 1 1 E9
1a 0FF 0F 1 1 0 1 0 1 1 F1
1b 0FF 0F 1 1 0 1 0 1 1 F9
1c 0FF 0F 1 1 0 1 0 1 1 52
1d 0FF 0F 1 1 0 1 0 1 1 5A
1e 0FF 0F 1 1 0 1 0 1 1 62
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
IRQ20 -> 20
IRQ21 -> 21
IRQ22 -> 22
IRQ23 -> 23
IRQ24 -> 24
IRQ25 -> 25
IRQ26 -> 26
IRQ27 -> 27
IRQ28 -> 28
IRQ29 -> 29
IRQ30 -> 30
.................................... done.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0080
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Assigning I/O space 5800-581f to device 00:a2
PCI: Enabling I/O for device 00:a2
PCI->APIC IRQ transform: (B1,I7,P0) -> 30
PCI->APIC IRQ transform: (B1,I9,P0) -> 23
PCI->APIC IRQ transform: (B1,I9,P1) -> 22
PCI: using PPB(B0,I15,P0) to get irq 19
PCI->APIC IRQ transform: (B2,I0,P0) -> 19
PCI: Device 00:00 not found by BIOS
PCI: Device 00:a0 not found by BIOS
PCI: Device 00:a1 not found by BIOS
PCI: Device 00:a2 not found by BIOS
PCI: Device 00:a3 not found by BIOS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev a1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf100-0xf107, BIOS settings: hda:pio, hdb:pio
hda: CD-ROM CDU701-Q, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 14X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
Partition check:
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ncr53c8xx: at PCI bus 1, device 9, function 0
ncr53c8xx: 53c876 detected
ncr53c8xx: at PCI bus 1, device 9, function 1
ncr53c8xx: 53c876 detected
ncr53c876-0: rev=0x14, base=0xc6efdf00, io_port=0x2000, irq=23
ncr53c876-0: ID 7, Fast-20, Parity Checking
ncr53c876-0: on-chip RAM at 0xc6eff000
ncr53c876-0: restart (scsi reset).
ncr53c876-0: Downloading SCSI SCRIPTS.
ncr53c876-1: rev=0x14, base=0xc6efde00, io_port=0x2400, irq=22
ncr53c876-1: NCR clock is 40218KHz, 40218KHz
ncr53c876-1: ID 7, Fast-20, Parity Checking
ncr53c876-1: on-chip RAM at 0xc6efe000
ncr53c876-1: restart (scsi reset).
ncr53c876-1: Downloading SCSI SCRIPTS.
scsi0 : ncr53c8xx - version 3.2a-2
scsi1 : ncr53c8xx - version 3.2a-2
scsi : 2 hosts.
ncr53c876-0-<6,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 15)
Vendor: Quantum Model: DLT4000 CPQ DRV Rev: D473
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st0 at scsi0, channel 0, id 6, lun 0
cpqarray: Device e11 has been found at 2 0
Compaq SMART2 Driver (v 1.0.5)
Found 1 controller(s)
cpqarray: Finding drives on ida0 (Smart Array 3200)
cpqarray ida/c0d0: blksz=512 nr_blks=106692000
ida/c0d0: ida/c0d0p1 < ida/c0d0p5 ida/c0d0p6 ida/c0d0p7 ida/c0d0p8 ida/c0d0p9
ida/c0d0p10 > ida/c0d0p3
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 72k freed
Adding Swap: 1052616k swap-space (priority -1)
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/mentre/smp-faq/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
