Hi,
Got this message from a DELL Precision Workstation 210, so emailing,
as instructed. Output of dmesg attached. Let me know if more info is
necessary.
Regards,
Borislav
Linux version 2.3.40smp (root@tobler) (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #3 SMP Thu Jan 27 18:23:40 CET 2000
e820: 000a0000 @ 00000000 (usable)
e820: 00010000 @ 000f0000 (reserved)
e820: 0fe9e000 @ 00100000 (usable)
e820: 00062000 @ 0ff9e000 (reserved)
e820: 00500000 @ ffb00000 (reserved)
e820: 00010000 @ fec00000 (reserved)
e820: 00010000 @ fee00000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 01042192
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: DELL Product ID: Opti GX300 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bootup CPU
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is ISA
I/O APIC #2 Version 32 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
On node 0 totalpages: 0000ff9e
zone(0): 4096 pages.
zone(1): 61342 pages.
zone(2): 0 pages.
Initializing CPU#0
Detected 529779743 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 527.56 BogoMIPS
Memory: 254464k/261752k available (1284k kernel code, 6904k reserved, 125k data, 152k
init, 0k highmem)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Coppermine) stepping 01
per-CPU timeslice cutoff: 50.07 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000040
ESR value after enabling vector: 00000000
CPU present map: 3
Booting processor 1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Deasserting INIT.
#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#1
Waiting for send to finish...
CPU#1 (phys ID: 1) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 529.20 BogoMIPS
Stack at about c14c5fbc
OK.
CPU1: Intel Pentium III (Coppermine) stepping 01
CPU has booted.
Before bogomips.
Total of 2 processors activated (1056.77 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-13, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=81 pin1=2 pin2=0
activating NMI Watchdog ... done.
number of MP IRQ sources: 42.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 0FF 0F 0 0 0 0 0 1 1 61
04 0FF 0F 0 0 0 0 0 1 1 69
05 0FF 0F 0 0 0 0 0 1 1 71
06 0FF 0F 0 0 0 0 0 1 1 79
07 0FF 0F 0 0 0 0 0 1 1 81
08 0FF 0F 0 0 0 0 0 1 1 89
09 0FF 0F 0 0 0 0 0 1 1 91
0a 0FF 0F 0 0 0 0 0 1 1 99
0b 0FF 0F 0 0 0 0 0 1 1 A1
0c 0FF 0F 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 0 0 0 0 0 1 1 B1
0f 0FF 0F 0 0 0 0 0 1 1 B9
10 0FF 0F 1 1 0 1 0 1 1 C1
11 0FF 0F 1 1 0 1 0 1 1 C9
12 0FF 0F 1 1 0 1 0 1 1 D1
13 0FF 0F 1 1 0 1 0 1 1 D9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 529.8240 MHz.
..... host bus clock speed is 132.4558 MHz.
cpu: 0, clocks: 1324558, slice: 441519
CPU0<C0:1324544,C:883024,D:1,S:441519,C:1324558>
cpu: 1, clocks: 1324558, slice: 441519
CPU1<C0:1324544,C:441504,D:2,S:441519,C:1324558>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
PCI: PCI BIOS revision 2.10 entry at 0xfc06e
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Interrupt Routing Table found at 0xc00fbbe0 [router type 8086/7110]
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I12,P0) -> 18
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 16Kbytes
TCP: Hash tables configured (established 8192 bind 10922)
Starting kswapd v1.6
Serial driver version 4.91 (1999-11-17) with MANY_PORTS SHARE_IRQ SERIAL_PCI PCI_IOMEM
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.30
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DPTA-372730, ATA DISK drive
hdc: CRD-8480C, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DPTA-372730, 26105MB w/1961kB Cache, CHS=3328/255/63
hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.06
Partition check:
hda: hda1 hda2 hda3 hda4
3c59x.c:v0.99H 11/17/98 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3c905C Tornado at 0xec80, ***INVALID CHECKSUM 007e*** 00:c0:4f:09:07:c7,
IRQ 18
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 152k freed
Adding Swap: 265064k swap-space (priority -1)
