As said in dmesg I send my log. My system is a PIIIDM3 i840 w/two P3-650,
AIC-7892.
And... as I said to this list can't run linux with 2.2.15 Kernel. Am I in
risk running this server with 2.3.99-pre8 Kernel?
Thanks,
David.
Linux version 2.3.99-pre8 ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #2 SMP Tue May 23 22:50:40
CEST 2000
e820: 0009fc00 @ 00000000 (usable)
e820: 00000400 @ 0009fc00 (reserved)
e820: 00020000 @ 000e0000 (reserved)
e820: 1fee0000 @ 00100000 (usable)
e820: 00018000 @ 1ffe0000 (ACPI data)
e820: 00008000 @ 1fff8000 (ACPI NVS)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 000faf50
hm, page 000fa000 reserved twice.
hm, page 000fb000 reserved twice.
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
On node 0 totalpages: 131040
zone(0): 4096 pages.
zone(1): 126944 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: _AMI_ Product ID: 840_CARMEL__ APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bootup CPU
Processor #1 Pentium(tm) Pro APIC version 17
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
Bus #0 is PCI
Bus #1 is PCI
Bus #2 is PCI
Bus #3 is PCI
Bus #4 is PCI
Bus #5 is ISA
I/O APIC #2 Version 32 at 0xFEC00000.
I/O APIC #3 Version 32 at 0xFF7FE000.
Int: type 3, pol 0, trig 0, bus 5, IRQ 00, APIC ID 2, APIC INT 00
Int: type 0, pol 0, trig 0, bus 5, IRQ 01, APIC ID 2, APIC INT 01
Int: type 0, pol 0, trig 0, bus 5, IRQ 00, APIC ID 2, APIC INT 02
Int: type 0, pol 0, trig 0, bus 5, IRQ 03, APIC ID 2, APIC INT 03
Int: type 0, pol 0, trig 0, bus 5, IRQ 04, APIC ID 2, APIC INT 04
Int: type 0, pol 0, trig 0, bus 5, IRQ 05, APIC ID 2, APIC INT 05
Int: type 0, pol 0, trig 0, bus 5, IRQ 06, APIC ID 2, APIC INT 06
Int: type 0, pol 0, trig 0, bus 5, IRQ 07, APIC ID 2, APIC INT 07
Int: type 0, pol 1, trig 1, bus 5, IRQ 08, APIC ID 2, APIC INT 08
Int: type 0, pol 0, trig 0, bus 5, IRQ 09, APIC ID 2, APIC INT 09
Int: type 0, pol 0, trig 0, bus 5, IRQ 0a, APIC ID 2, APIC INT 0a
Int: type 0, pol 0, trig 0, bus 5, IRQ 0b, APIC ID 2, APIC INT 0b
Int: type 0, pol 0, trig 0, bus 5, IRQ 0c, APIC ID 2, APIC INT 0c
Int: type 0, pol 0, trig 0, bus 5, IRQ 0d, APIC ID 2, APIC INT 0d
Int: type 0, pol 0, trig 0, bus 5, IRQ 0e, APIC ID 2, APIC INT 0e
Int: type 0, pol 0, trig 0, bus 5, IRQ 0f, APIC ID 2, APIC INT 0f
Int: type 0, pol 3, trig 3, bus 0, IRQ 7c, APIC ID 2, APIC INT 10
Int: type 0, pol 3, trig 3, bus 4, IRQ 00, APIC ID 2, APIC INT 10
Int: type 0, pol 3, trig 3, bus 0, IRQ 7d, APIC ID 2, APIC INT 11
Int: type 0, pol 3, trig 3, bus 0, IRQ 7d, APIC ID 2, APIC INT 11
Int: type 0, pol 3, trig 3, bus 1, IRQ 18, APIC ID 2, APIC INT 12
Int: type 2, pol 0, trig 0, bus 5, IRQ 00, APIC ID 2, APIC INT 17
Int: type 0, pol 3, trig 3, bus 3, IRQ 10, APIC ID 3, APIC INT 08
Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
mapped IOAPIC to ffffc000 (ff7fe000)
Initializing CPU#0
Detected 646324222 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1291.06 BogoMIPS
Memory: 512268k/524160k available (1661k kernel code, 11504k reserved, 145k
data, 184k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
kmem_create: Poisoning requested, but con given - bdev_cache
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
kmem_create: Poisoning requested, but con given - inode_cache
Pentium-III serial number disabled.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch ([EMAIL PROTECTED])
Pentium-III serial number disabled.
CPU0: Intel Pentium III (Coppermine) stepping 01
per-CPU timeslice cutoff: 714.19 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000084
ESR value after enabling vector: 00000000
CPU present map: 3
Booting processor 1/1 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Startup point 1.
Initializing CPU#1
Waiting for send to finish...
CPU#1 (phys ID: 1) waiting for CALLOUT
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1291.06 BogoMIPS
Stack at about c1919fbc
Pentium-III serial number disabled.
OK.
CPU1: Intel Pentium III (Coppermine) stepping 01
CPU has booted.
Before bogomips.
Total of 2 processors activated (2582.12 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
ENABLING IO-APIC IRQs
...changing IO-APIC physical APIC ID to 2 ... ok.
...changing IO-APIC physical APIC ID to 3 ... ok.
Synchronizing Arb IDs.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-19, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3,
3-4, 3-5, 3-6, 3-7, 3-9, 3-10, 3-11,
3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23 not
connected.
..TIMER: vector=81 pin1=2 pin2=0
activating NMI Watchdog ... done.
number of MP IRQ sources: 23.
number of IO-APIC #2 registers: 24.
number of IO-APIC #3 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 0FF 0F 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 0FF 0F 0 0 0 0 0 1 1 61
04 0FF 0F 0 0 0 0 0 1 1 69
05 0FF 0F 0 0 0 0 0 1 1 71
06 0FF 0F 0 0 0 0 0 1 1 79
07 0FF 0F 0 0 0 0 0 1 1 81
08 0FF 0F 0 0 0 0 0 1 1 89
09 0FF 0F 0 0 0 0 0 1 1 91
0a 0FF 0F 0 0 0 0 0 1 1 99
0b 0FF 0F 0 0 0 0 0 1 1 A1
0c 0FF 0F 0 0 0 0 0 1 1 A9
0d 000 00 1 0 0 0 0 0 0 00
0e 0FF 0F 0 0 0 0 0 1 1 B1
0f 0FF 0F 0 0 0 0 0 1 1 B9
10 0FF 0F 1 1 0 1 0 1 1 C1
11 0FF 0F 1 1 0 1 0 1 1 C9
12 0FF 0F 1 1 0 1 0 1 1 D1
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
WARNING: unexpected IO-APIC, please mail
to [EMAIL PROTECTED]
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 0FF 0F 1 1 0 1 0 1 1 D9
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ32 -> 8
.................................... done.
calibrating APIC timer ...
..... CPU clock speed is 646.3945 MHz.
..... host bus clock speed is 99.4451 MHz.
cpu: 0, clocks: 994451, slice: 331483
CPU0<C0:994448,C:662960,D:5,S:331483,C:994451>
cpu: 1, clocks: 994451, slice: 331483
CPU1<C0:994448,C:331472,D:10,S:331483,C:994451>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
PCI: PCI BIOS revision 2.10 entry at 0xfdb91, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B4,I0,P0) -> 16
PCI->APIC IRQ transform: (B3,I4,P0) -> 32
PCI->APIC IRQ transform: (B1,I6,P0) -> 18
Linux NET4.0 for Linux 2.3
Based upon Swansea University Computer Society NET3.039
kmem_create: Poisoning requested, but con given - skbuff_head_cache
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Starting kswapd v1.6
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: not 100% native mode: will probe irqs later
hda: CRD-8480M, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.08
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(scsi0) <Adaptec AIC-7892 Ultra 160/m SCSI host adapter> found at PCI 3/4/0
(scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
<Adaptec AIC-7892 Ultra 160/m SCSI host adapter>
scsi : 1 host.
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
Vendor: SEAGATE Model: ST39175LW Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
(scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 15.
Vendor: SEAGATE Model: ST39175LW Rev: 0001
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
Partition check:
sda: sda1 sda2 < sda5 sda6 >
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17783240 [8683 MB] [8.7 GB]
sdb: sdb1 sdb2 < sdb5 sdb6 >
Serial driver version 4.93 (2000-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10c
8139too Fast Ethernet driver 0.9.4.1 loaded
eth0: 'RealTek RTL8139 Fast Ethernet' board found at 0xff6fff00, IRQ 18
eth0: Chip is 'RTL-8139B(L)'
eth0: MAC address 00:10:a7:02:17:8f.
[drm] Initialized tdfx 0.0.1 19991009 on minor 63
kmem_create: Forcing size word alignment - nfs_fh
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding Swap: 321260k swap-space (priority -1)
-
Linux SMP list: FIRST see FAQ at http://www.irisa.fr/prive/dmentre/smp-howto/
To Unsubscribe: send "unsubscribe linux-smp" to [EMAIL PROTECTED]
