On Sun, 2014-03-30 at 12:58 +0200, Olliver Schinagl wrote: > 4271202 sunxi: add board hcore hc860 > seems to be un-able to extract the tar-ball and causes an oops.
That's from ages ago, isn't it? Are you sure it isn't some other component which has changed recently, e.g. the kernel? That said the sorts of random crashed you've been posting sound a lot like either a DRAM issue or overheating. Either of which could be down to u-boot setting up something wrong or bad hardware I suppose. > This is on an SSD, with a 2amps charger. I ran tinymembenches before > never exceeding 0.7 amps; could someone confirm this on the cubietruck? I've just FEL booted with 2014.04-rc2-00665-g96510e1 (i.e. current u-boot-sunxi.git#sunxi) onto a SATA installation and have started a git clone of the kernel, after which I'll run a build and see what happens. Have you checked the checksum of the tarball you are extracting and tried unpacking it on a known good system? Ian. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.