Hello again,
On Aug/03/2005, Torsten Koschorrek wrote:
> >>Maybe there is an ethernet gadget driver on top of the usb device
> >>controller driver. It would be good to know, which driver(s) are loaded
> >
> >
> >I think that no...
> >
>
> Oops, my fault. I thought of ethernet concerning the NET2280, but it's
> your USB-Host, sorry.
yes, no problem
> >>on the mx21. Can u give us some debug output, when your are loading the
> >>modules? You have to enable the usb device controller driver and a
> >>gadget driver (serial, ethernet, storage). Which modules do you have
> >>enabled in the config?
> >
> >
> >Now I haven't access to MX21 (I am not in the university). The modules
>
> Too bad :(
tomorrow morning I will have access, so I will do some more tests...
> >wasn't related to USB, and then I tried to load (Freescale told us 3
> >weeks ago, but I was on holidays...):
> >
> >usbdcore.o
> >mx2_bi.o
> >
> >And no signal in lspci from Desktop.
> >
> >Then I was trying usbd_drv.o, usbdrv.o, usb-mx2otg.o, mx2usbd.o without
> >success (I was loading and unloading to see if something happends...)
> >
> >I think that only with USB device controller driver should appear on
> >Desktop lspci (because I am saying a VendorID and ProductID in Kernel
> >configuration)
>
> It would be good to know, what the device driver says, when you load it.
> Does it successfully initialize or is something wrong ...
no, it seems that everything is fine. No error/warning messages...
> I think it's better to stay on the device side (mx21), before looking to
> the host (your pc).
Yes, but how i can know that it is working fine without check from host
side? (the only way, for me, to know that it is working is checking from
host side
> By the way. Why don't u use a newer kernel 2.6.x?
I think that tomorrow I will try :-)
I am not trying because Freescale gives some (long) patch for MX.21 and
2.4.20, and because some workmates are working in 2.4.20 support for
some devices.
Are you working with MX.21? With 2.6 only? Or 2.4 too?
If you are working with 2.4, have you done "something" that then doing
"lspci" on your host then appears MX.21?
Tonight I will prepare Kernel for tomorrow and at least to make little
test.
Thank you very much for your attention,
--
Carles Pina i Estany GPG id: 0x8CBDAE64
http://pinux.info
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
