Hi All
I have a Freecom FS-1 CD-RW that I plug into my Compaq
Armada laptop.
Everything used to work fine using SuSE 8.1. However,
when I tried to upgrade to SuSE 8.2 it stopped
working. I have also tried with various other distro's
without success.
For a while I have since just stayed with 8.1, but now
that I have a bit of spare time on my hands I would
like to resolve the problem and move to Knoppix as
distro of choice.
I am currently experimenting with Knoppix 3.3, which
has a slightly modified 2.4.22 kernel. I have tried
compiling a plain 2.4.22 kernel, making sure that
Freecom support was included, but this gave the same
results.
Can someone please point me in the right direction to
get this solved?
The following gives details of trying to use the CD-RW
under SuSE 8.1 (which works) and Knoppix 3.3 (which
doesn't).
Thanks
Kevin
================================================================================
THE HARDWARE
Compaq Armada M700
Freecom FS-1 CD-RW
#lspci -v|grep HCI
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB
PIIX4 USB (rev 01) (prog-if 00 [UHCI])
================================================================================
WORKS - using SuSE 8.1 - kernel 2.4.19-4GB
#lsmod|grep uhci
usb-uhci 21612 0 (unused)
usbcore 56768 1 [snd usb-uhci]
#cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=3400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
#cdrecord -scanbus
cdrecord: No such file or directory. Cannot open
'/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord
-scanbus'. Make sure you are root.
Cdrecord 1.11a28 (i686-suse-linux) Copyright (C)
1995-2002 J�rg Schilling
<--- plugs usb cd-rw in --->
#dmesg
hub.c: USB new device connect on bus1/1, assigned
device number 2
usb.c: USB device 2 (vend/prod 0x7ab/0xfc03) is not
claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 917
usb-uhci.c: ENXIO 80000200, flags 8, urb c3203c40,
burb c9a6b420
usb-uhci.c: ENXIO 80000200, flags 8, urb c3203c40,
burb c9a6b420
Vendor: HL-DT-ST Model: CD-RW GCE-8080N Rev: 1.00
Type: CD-ROM ANSI SCSI
revision: 02
sg: find_free_slot ...<7>sg: initializing
sg_major_array ...<4>sg: allocated major 21
sg: ... found 15:00
sg_attach: dev0=(21:0)
sd_attach()
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0,
lun 0
usb-uhci.c: interrupt, status 3, frame# 911
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
#lsmod | grep uhci
usb-uhci 21612 0 (unused)
usbcore 56768 1 [usb-storage snd
usb-uhci]
#cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=3400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2
Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=07ab ProdID=fc03 Rev=11.10
S: Manufacturer=FREECOM
S: Product=USB-2 Drive
S: SerialNumber=406F11100Fw15004EFA2EE
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms
#cdrecord -scanbus
Linux sg driver version: 3.2.0
Cdrecord 1.11a28 (i686-suse-linux) Copyright (C)
1995-2002 J�rg Schilling
Using libscg version 'schily-0.6'
scsibus0:
0,0,0 0) 'HL-DT-ST' 'CD-RW GCE-8080N ' '1.00'
Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
CD-Roast will pick this up and run with it.
================================================================================
DOESN'T WORK - Using Knoppix 3.3 - kernel 2.4.22-xfs
NOTE: The following details are from Knoppix 3.3, but
similar is encountered
when using SuSE 8.2, generic 2.4.22 kernel installed
onto Knoppix 3.3 etc.
#lsmod|grep uhci
usb-uhci 21836 0 (unused)
usbcore 57472 1 [usb-uhci]
#cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=3400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
#cdrecord -scanbus
Linux sg driver version: 3.1.25
Cdrecord 2.01a16 (i686-pc-linux-gnu) Copyright (C)
1995-2003 J�rg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'Compaq ' 'DVD-ROM SD-C2402' '1A05'
Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
<--- plugs usb cd-rw in --->
#dmesg
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x7ab/0xfc03) is not
claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi2 : SCSI emulation for USB Mass Storage devices
usb_control/bulk_msg: timeout
usb-uhci.c: interrupt, status 3, frame# 823
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
VFS: Can't find ext3 filesystem on dev ide0(3,4).
VFS: Can't find ext2 filesystem on dev ide0(3,4).
Unable to identify CD-ROM format.
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide0(3,4))
...
for (ide0(3,4))
ide0(3,4):Using r5 hash to sort names
#lsmod | grep uhci
usb-uhci 21868 0 (unused)
usbcore 57472 1 [usb-storage
usb-uhci]
#cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=3400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2
Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=07ab ProdID=fc03 Rev=11.10
S: Manufacturer=FREECOM
S: Product=USB-2 Drive
S: SerialNumber=406F11100Fw15004EFA2EE
C:* #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms
#cdrecord -scanbus
Linux sg driver version: 3.1.25
Cdrecord 2.01a16 (i686-pc-linux-gnu) Copyright (C)
1995-2003 J�rg Schilling
Using libscg version 'schily-0.7'
scsibus0:
0,0,0 0) 'Compaq ' 'DVD-ROM SD-C2402' '1A05'
Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
CD-Roast sees the DVD, but not the CD-Writer.
================================================================================
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
