--- Matthew Dharm <[EMAIL PROTECTED]>
wrote:
> On Thu, Oct 02, 2003 at 05:21:34PM +0100, Ged
> Haywood wrote:
> > Hi Kevin,
> >
> > On Thu, 2 Oct 2003, Kevin Golding wrote:
> >
> > > notice that the sg module is added, presumably
> for my
> > > dvd drive at /dev/hdb (mountable at /dev/sr0).
> >
> > That's being loaded automatically when you need
> it.
> >
> > You should have sd_mod too, that might be the
> problem.
>
> sd_mod is only for disks. sr_mod is for CD-ROM.
>
> Matt
Hi All
I think the sd_ and sr_mods were compiled into the
kernel itself.
Anyway, just to be sure, I downloaded and recompiled
the 2.4.22 kernel yesterday and compiled sr_mod and
sd_mod as modules. I also noticed some stuff about
verbose reporting and debugging which I switched on.
After booting, I manually did..
# modprobe sd_mod
# modprobe sr_mod
... and tried plugging the drive in again.
It still didn't work.
Below is the lsmod output as before.
Also below is the more verbose output from dmesg.
Thanks
Kevin
--------------------------------------
lsmod output
<--- Just booted up --->
Module Size Used by Not tainted
orinoco_cs 4212 1
orinoco 32940 0 [orinoco_cs]
hermes 5348 0 [orinoco_cs orinoco]
autofs4 9204 0 (unused)
af_packet 13768 0
ext3 63012 0 (unused)
jbd 47972 0 [ext3]
nls_iso8859-1 2780 0 (unused)
ntfs 49536 0 (unused)
msdos 5004 0 (unused)
agpgart 37336 0 (unused)
maestro 28456 1
soundcore 3300 2 [maestro]
eepro100 18996 0
mii 2112 0 [eepro100]
serial 51492 0
hid 19748 0 (unused)
mousedev 4024 1
input 3040 0 [hid mousedev]
usb-uhci 21836 0 (unused)
usbcore 63776 0 [hid usb-uhci]
ds 6344 2 [orinoco_cs]
yenta_socket 9536 2
pcmcia_core 39808 0 [orinoco_cs ds
yenta_socket]
apm 9704 1
rtc 7132 0
<--- Manually modprobe sr_mod and sd_mod --->
Module Size Used by Not tainted
sr_mod 14424 0 (unused)
sd_mod 11372 0 (unused)
orinoco_cs 4212 1
orinoco 32940 0 [orinoco_cs]
hermes 5348 0 [orinoco_cs orinoco]
autofs4 9204 0 (unused)
af_packet 13768 0
ext3 63012 0 (unused)
jbd 47972 0 [ext3]
nls_iso8859-1 2780 0 (unused)
ntfs 49536 0 (unused)
msdos 5004 0 (unused)
agpgart 37336 0 (unused)
maestro 28456 1
soundcore 3300 2 [maestro]
eepro100 18996 0
mii 2112 0 [eepro100]
serial 51492 0
hid 19748 0 (unused)
mousedev 4024 1
input 3040 0 [hid mousedev]
usb-uhci 21836 0 (unused)
usbcore 63776 0 [hid usb-uhci]
ds 6344 2 [orinoco_cs]
yenta_socket 9536 2
pcmcia_core 39808 0 [orinoco_cs ds
yenta_socket]
apm 9704 1
rtc 7132 0
<--- Plug in drive --->
Module Size Used by Not tainted
usb-storage 113392 1 (initializing)
sr_mod 14424 0 (unused)
sd_mod 11372 0 (unused)
orinoco_cs 4212 1
orinoco 32940 0 [orinoco_cs]
hermes 5348 0 [orinoco_cs orinoco]
autofs4 9204 0 (unused)
af_packet 13768 0
ext3 63012 0 (unused)
jbd 47972 0 [ext3]
nls_iso8859-1 2780 0 (unused)
ntfs 49536 0 (unused)
msdos 5004 0 (unused)
agpgart 37336 0 (unused)
maestro 28456 1
soundcore 3300 2 [maestro]
eepro100 18996 0
mii 2112 0 [eepro100]
serial 51492 0
hid 19748 0 (unused)
mousedev 4024 1
input 3040 0 [hid mousedev]
usb-uhci 21836 0 (unused)
usbcore 63776 0 [usb-storage hid
usb-uhci]
ds 6344 2 [orinoco_cs]
yenta_socket 9536 2
pcmcia_core 39808 0 [orinoco_cs ds
yenta_socket]
apm 9704 1
rtc 7132 0
<--- Do 'cdrecord -scanbus' --->
Module Size Used by Not tainted
sg 30924 0 (autoclean) (unused)
usb-storage 113392 0 (unused)
sr_mod 14424 0 (unused)
sd_mod 11372 0 (unused)
orinoco_cs 4212 1
orinoco 32940 0 [orinoco_cs]
hermes 5348 0 [orinoco_cs orinoco]
autofs4 9204 0 (unused)
af_packet 13768 0
ext3 63012 0 (unused)
jbd 47972 0 [ext3]
nls_iso8859-1 2780 0 (unused)
ntfs 49536 0 (unused)
msdos 5004 0 (unused)
agpgart 37336 0 (unused)
maestro 28456 1
soundcore 3300 2 [maestro]
eepro100 18996 0
mii 2112 0 [eepro100]
serial 51492 0
hid 19748 0 (unused)
mousedev 4024 1
input 3040 0 [hid mousedev]
usb-uhci 21836 0 (unused)
usbcore 63776 0 [usb-storage hid
usb-uhci]
ds 6344 2 [orinoco_cs]
yenta_socket 9536 2
pcmcia_core 39808 0 [orinoco_cs ds
yenta_socket]
apm 9704 1
rtc 7132 0
--------------------------------------
dmesg
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:07.2-1, assigned address 2
usb.c: kmalloc IF c744cfa0, numif 1
usb.c: new device strings: Mfr=73, Product=81,
SerialNumber=93
usb.c: USB device number 2 default language ID 0x409
Manufacturer: FREECOM
Product: USB-2 Drive
SerialNumber: 406F11100Fw15004EFA2EE
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x7ab/0xfc03) is not
claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 2.00
Vendor:Product = 07ab:fc03
MaxPacketSize0 = 64
NumConfigurations = 1
Device version = 11.10
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 02
iConfiguration = 00
bmAttributes = c0
MaxPower = 98mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 03
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 01 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 82 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 83 (in)
bmAttributes = 03 (Interrupt)
wMaxPacketSize = 0002
bInterval = 20
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 98
usb-storage: Array length appears to be: 100
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc850c9a4 Out: 0xc850c990
Int: 0xc850c9b8 (Period 32)
usb-storage: New GUID 07abfc03100f015004efa2ee
usb-storage: GetMaxLUN command result is 1, data is 0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 a9 cc 00 f0 fe 0f
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN
0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255
bytes
usb-storage: command_abort() called
usb-storage: usb_stor_bulk_msg() returned -104 xferred
0/255
usb-storage: usb_stor_transfer_partial(): transfer
aborted
usb-storage: Bulk data transfer result 0x3
usb-storage: -- transport indicates command was
aborted
usb-storage: Bulk reset requested
usb_control/bulk_msg: timeout
usb-storage: Bulk soft reset failed -110
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 a9 cc 00 f0 fe 0f
usb-storage: Bulk command S 0x43425355 T 0x2 Trg 0 LUN
0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x2 R 0 Stat
0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk command S 0x43425355 T 0x3 Trg 0 LUN
0 L 18 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 18
bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred
18/18
usb-storage: usb_stor_transfer_partial(): transfer
complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x3 R 0 Stat
0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ:
0x0
usb-storage: Unit Attention: device reset occurred
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 a9 cc 00 f0 fe 0f
usb-storage: Bulk command S 0x43425355 T 0x4 Trg 0 LUN
0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255
bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred
36/255
usb-storage: Bulk data transfer result 0x1
usb-storage: Attempting to get CSW...
usb-uhci.c: interrupt, status 3, frame# 1961
usb-storage: clearing endpoint halt for pipe
0xc0010280
usb-storage: usb_stor_clear_halt: result=0
usb-storage: Attempting to get CSW (2nd try)...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x4 R 219
Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 -
was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface c744cfa0
USB Mass Storage support registered.
--------------------------------------
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
