I don't think that one can assign more than one workgroup to ME.
You might have to change all other home boxes to the same workgroup as
assigned by @home. But then, security issues??
Cheers
Auyeung
----- Original Message -----
From: <[EMAIL PROTECTED]>
> Hello All,
>
> I know this is a windoze question, but the expertise of this group is why
I use
> Linux in the first place.
>
> My question, as I got no help from the windoze literature, is how do I set
up
> more than one workgroup under windoze ME? Then I want to route from the
> BNC card to the RJ45 card, which will be my gateway. It will have a
dynamic
> IP address from the ISP provider, Comcast@home.
>
> Overview of current setup:
>
> HOMENET - workgroup
> mixed Linux/windoze boxes
> Dual boot box has windoze ME with
> BNC NIC ethernet card on 192.168.1.x homenet
> RJ45 NIC ethernet card on as yet to
determine IP address
> have set it to 192.168.1.x for the
time being
> All other boxes only have one NIC card all set in the
192.168.1.x
> range and are using BNC type connectors
>
>
> I know, I need to get with the times, but this house is rented and BNC was
able
> to be setup using existing holes the owner drilled for his speaker
wires...go figure.
>
> Any and all help/thoughts/suggestions would be appreciated.
>
>
> Regards,
>
> Keith B.
_______________________________________________
http://linux.nf -- [EMAIL PROTECTED]
Archives, Subscribe, Unsubscribe, Digest, Etc
->http://linux.nf/mailman/listinfo/linux-users
