Kumar Gala wrote:
On Jun 2, 2008, at 11:03 AM, Jeff Garzik wrote:
Kumar Gala wrote:
The core portions of the phylib aren't capable of being used as
a module. This isn't really any different than something like i2c
in that the bus driver and core need to be built into the kernel.
Signed-off-by: Kumar Gala <[EMAIL PROTECTED]>
---
Jeff, please consider this for 2.6.26 as w/o it we get build issues
if phylib is config'd as a module on ppc.
drivers/net/phy/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6eb2d31..ab04cc7 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -3,7 +3,7 @@
#
menuconfig PHYLIB
- tristate "PHY Device support and infrastructure"
+ bool "PHY Device support and infrastructure"
depends on !S390
depends on NET_ETHERNET
What are the issues?
The core _should_ be able to be built as a module.
The core provides functions like phy_read/phy_write. Andy has recently
introduced board level workaround/fixups. The problem is these
workarounds tend to use phy_read/phy_write and the board/platform code
is not built as modules.
So we get errors like:
arch/powerpc/platforms/built-in.o: In function `mpc8568_mds_phy_fixups':
/home/galak/git/master/powerpc/arch/powerpc/platforms/85xx/mpc85xx_mds.c:99:
undefined reference to `phy_write'
/home/galak/git/master/powerpc/arch/powerpc/platforms/85xx/mpc85xx_mds.c:104:
undefined reference to `phy_read'
The whole world isn't embedded ppc, we use this stuff elsewhere too.
You guys need to figure out something that doesn't require phylib be
built-in on ALL platforms, but only the platforms that require it.
Or, update the platform to not require built-in -- convert the board
code to function pointers, and execute them later on somehow, for example.
Jeff
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev