On 07/30/2013 03:49:22 AM, Po Liu wrote:
From: Mingkai Hu <mingkai...@freescale.com>
Signed-off-by: Mingkai Hu <mingkai...@freescale.com>
Signed-off-by: Po Liu <po....@freescale.com>
---
Changes for v2:
- None
Changes for v3:
- None
arch/powerpc/boot/dts/fsl/c293si-post.dtsi | 193
+++++++++++++++++++++++++++++
arch/powerpc/boot/dts/fsl/c293si-pre.dtsi | 63 ++++++++++
2 files changed, 256 insertions(+)
create mode 100644 arch/powerpc/boot/dts/fsl/c293si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/c293si-pre.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
new file mode 100644
index 0000000..bd20832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi
@@ -0,0 +1,193 @@
+/*
+ * C293 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following
conditions are met:
+ * * Redistributions of source code must retain the above
copyright
+ * notice, this list of conditions and the following
disclaimer.
+ * * Redistributions in binary form must reproduce the above
copyright
+ * notice, this list of conditions and the following
disclaimer in the
+ * documentation and/or other materials provided with the
distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote
products
+ * derived from this software without specific prior written
permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms
of the
+ * GNU General Public License ("GPL") as published by the Free
Software
+ * Foundation, either version 2 of that License or (at your option)
any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS''
AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE
FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,ifc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0xa000 */
+&pci0 {
+ compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <16 2 0 0>;
Remove clock-frequency (surely PCIe is not running at 33 MHz).
+ crypto@80000 {
+/include/ "qoriq-sec6.0-0.dtsi"
+ };
+
+ crypto@80000 {
+ reg = <0x80000 0x20000>;
+ ranges = <0x0 0x80000 0x20000>;
+
+ jr@1000{
+ interrupts = <45 2 0 0>;
+ };
+ jr@2000{
+ interrupts = <57 2 0 0>;
+ };
+ };
Do these inline the way the example shows.
-Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
