> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Wednesday, July 31, 2013 11:47 PM
> To: Liu Po-B43644
> Cc: Wood Scott-B07421; linuxppc-...@ozlabs.org; ga...@kernel.crashing.org;
> Fleming Andy-AFLEMING; Hu Mingkai-B21284
> Subject: Re: [PATCH v3 2/3] powerpc/85xx: Add silicon device tree for
> C293
>
> On 07/30/2013 09:13:28 PM, Liu Po-B43644 wrote:
> >
> > > -----Original Message-----
> > > From: Wood Scott-B07421
> > > Sent: Wednesday, July 31, 2013 2:28 AM
> > > To: Liu Po-B43644
> > > Cc: linuxppc-...@ozlabs.org; ga...@kernel.crashing.org; Fleming
> > Andy-
> > > AFLEMING; Hu Mingkai-B21284; Liu Po-B43644
> > > Subject: Re: [PATCH v3 2/3] powerpc/85xx: Add silicon device tree
> > for
> > > C293
> > >
> > > On 07/30/2013 03:49:22 AM, Po Liu wrote:
> > > > + crypto@80000 {
> > > > +/include/ "qoriq-sec6.0-0.dtsi"
> > > > + };
> > > > +
> > > > + crypto@80000 {
> > > > + reg = <0x80000 0x20000>;
> > > > + ranges = <0x0 0x80000 0x20000>;
> > > > +
> > > > + jr@1000{
> > > > + interrupts = <45 2 0 0>;
> > > > + };
> > > > + jr@2000{
> > > > + interrupts = <57 2 0 0>;
> > > > + };
> > > > + };
> > >
> > > Do these inline the way the example shows.
> > Sorry, Scott, I just remember in this way, the node can't be
> > recognized by system when run Uboot. The include can't be in the
> > crypto@80000. See the discussion in
> > http://git.am.freescale.net:8181/#/c/736/ .
> > Maybe I should re-modify the example file.
>
> git.am.freescale.net is not accessible outside of Freescale; don't
> reference it on external lists. In any case, I don't know what
> specifically you want me to look at there. Just put the explanation here.
Sorry, I've realize that.
The fact is that: when put the include into the crypto@xxxx, it can't compile
success(make c293pcie.dtb as example). Error will show as:
ERROR (duplicate_node_names): Duplicate node name
/soc@fffe00000/crypto@80000/jr@1000
> I do not expect the dtc output to be any different between the two
> methods. Could you check this (by using dtc to decompile the dtb
> afterward) and point out exactly how the output differs between the two
> approaches?
Since it will compile error in this way, so will not output .dtb file
>
> -Scott
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
