Hi,
that have been the correct two PINs. It should work.
I never saw a Lisa, where this kind of "Drive-support" didn't work.
Lisa 2 or Mac XL, doesn't matter - it should work.
So the only conclusion is after testing it with a second manipulated
drive, that your I/O Board or your motherboard could bee corred or has
some broken wires on the board
TOM from Bavaria
Am 26.02.2006 um 20:57 schrieb Jerome Vernet:
Hi,
I'm pretty sure that I had cut the right pin. take a look at my photo:
http://perso.wanadoo.fr/jerome.vernet/images/MP-F51Wb.jpg
I put in red what i had removed, and the track cutted under the red
cross.
For the ribbon (20 wires), wire 1 is the red (colored, some time) and
goes to the left on my picture. I count 9 wire, cut this one. I cut
the last (20). Not working.
It sould have worked ! It's equal to cut on the ribbon or remove the
pin or cut track from the pin.
So, I cut the track that goes to PIN 9 to a resistor -I ve checked
that with un mutlivolter- then cut the 20th. Same thing...
perhaps the drive is also dead, so I will retry with another one
(without killing anything on the drive itself).
I really need your grateful help, stay tuned !
Jerome
--
LisaList is sponsored by <http://lowendmac.com/> and...
Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html>
Support Low End Mac <http://lowendmac.com/lists/support.html>
LisaList info: <http://lowendmac.com/lists/lisa.html>
--> AOL users, remove "mailto:"
Send list messages to: <mailto:lisalist@mail.maclaunch.com>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/lisalist%40mail.maclaunch.com/>
iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com