if I want to make NAT how could I do it? the IP addresses are 10.130.51.83 WAN ip and 10.130.65.42 default gateway and 197.156.75.54 public IP our side and 197.156.75.53 and 10.130.65.41 is ip ISP's side. but I am not clear with the function of 10.130.65.41 and how can I make nat
On Wed, Apr 24, 2013 at 8:04 AM, Ryan Rodrigue <radiote...@aaremail.com>wrote: > ** ** > > Please don’t top post. It makes helping difficult.**** > > ** ** > > *From:* list-boun...@lists.pfsense.org [mailto: > list-boun...@lists.pfsense.org] *On Behalf Of *eyobe kebede > *Sent:* Wednesday, April 24, 2013 9:36 AM > *To:* pfSense support and discussion > *Subject:* Re: [pfSense] help**** > > ** ** > > we are using dSL and let me give you some information. we were using > 10.130.48.72 IP address give by the ISP and for some reason we have > purchased public ip 197.156.75.54. where technicians from the ISP do not > give us how to use the IP addresses and it become difficult to configure it > on pfsense. this are the solid facts **** > > wan ip 10.130.51.83 **** > > default gate way 10.130.65.42**** > > public ip 197.156.75.54 our side and 197.156.75.53 ISP side**** > > the we need how to configure this in pfsense?**** > > ** ** > > I would try 2 things.**** > > 1st I would try to setup the public IP that was given to you > (197.156.75.54) as a static IP in PF and setup the 197.156.75.53 as a > default gateway. (Don’t use DHCP)**** > > You will have to setup the DNS servers in the System > General Setup tab. > **** > > 2nd If that doesn’t work, I would try to move the PPPOE login information > to the PF box and put the DSL modem in bridge mode.**** > > ** ** > > ** ** > > _______________________________________________ > List mailing list > List@lists.pfsense.org > http://lists.pfsense.org/mailman/listinfo/list > >
_______________________________________________ List mailing list List@lists.pfsense.org http://lists.pfsense.org/mailman/listinfo/list
