You can change the BIOS to UEFI/CSM or Legacy BIOS to make it work but you'll probably want to work on transitioning to UEFI anyways.
Have you tried specifying the partition explicitly instead of 'Use next available formatted partition?' *-----------------------------------------------* *Adam Juelich* Pulaski Community School District <http://www.pulaskischools.org> Client Management Specialist 920-822-6075 On Tue, Apr 5, 2016 at 1:02 PM, Brendan Weir <[email protected]> wrote: > Hello all, > > > > We currently have HP ProDesk 600 G1’s as our desktop model and Elitebook > 840 G2’s as our laptops. We don’t really have any issue with our imaging. > Normal driver issues when we started, but good to go for a while now. Just > got our new laptop and desktops in (840 G3’s and EliteDesk 800 G1’s) and > both seem to use UEFI as the primary boot system. This was all new to me, > but after some tweaking and head banging (must use USB 3.0 boot drives) I > got the systems booting and pulling down the Task Sequence. > > > > Then I have issues. Focusing on the Elitebook 840 G3’s right now I can’t > seem to get the partitioning done correctly so that after applying the > image and drivers the system boots to the “Windows Boot Manager” and tells > me I need run the CD and do a Startup Repair. > > > > I have found a lot of information of BIOS partitions and UEFI partitions > and tricks and tips, but nothing seems to work right now. So I guess my > question is, can a BIOS - captured image be pushed down to a UEFI system? > Also if that can be done, how should I partition my drives in TS to make it > work? My current setup from research, > > > > Partitions: https://i.imgur.com/cCugFww.png > > > > Apply Image: https://i.imgur.com/RACIbrq.png > > > > I am very happy to post any more information that’s needed. Also may try > building a brand new system on the G3 and capturing it with all the UEFI > partitions, just hate to waste that time if I am just doing something wrong. > > > > Thanks > > > > Brendan > > > > > > > > *Brendan Weir* > > *IT Technical Solutions Architect *| Balfour Beatty Investments > > T: 610.355.8169 | M: 610.203.1613 | E: [email protected] > > [image: cid:[email protected]] > > > > ------------------------------ > This email may contain information which is confidential and is intended > only for use of the recipient/s named above. If you are not an intended > recipient, you are hereby notified that any copying, distribution, > disclosure, reliance upon or other use of the contents of this email is > strictly prohibited. If you have received this email in error, please > notify the sender and destroy it. > > -- ------------------------------ The Pulaski Community School District does not discriminate on the basis of any characteristic protected under State or Federal law.
