Hi friends,
After I booted a diskless node under LTSP, X windows is not
appearing on the screen. Login screen is appearing in the text-
mode. After getting advice from the group, I have changed the
Runlevel to 5 in "lts.conf" file when I rebooted the server and
node, I have got following messages on the screen of the node
(node configuration is Celron 800, 64MB SD Ram, Intel 810e chip-
set motherboard,rtl8139 ethernet card) and finally it is halted and giving message
that
INIT: cannot execute "/tmp/start_ws"
I HAVE ALSO ATTACHED THE lts.conf and rc.local files in this
message for the reference and for proper guidence. I have activated
the local applications in "exports" file and the IP of the node is added in
host.allow
Please suggest me how to overcome this problem.
Regards,
Vinod.
----------------------------------------------------------
(Some of the initial messages which appeared on the screen
were not typed down)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart : Maximum main mememory to use for agp memory : 27M
agpgart : Detected an Intel i810 E Chipset
agpgart : AGP aperture is 64M @ .........
Linux Net4.0 for Linux 2.2
Looking up port of RPC 100003/2 on 192.168.0.254
VFS Mounted root (NFS file system)
Freeing unused kernal memory 52K freed.
Init vertion 2.78 booting
Mounting /proc filesystem
Creating ramdisk on /tmp
mke2fs 1.18. 11-Nov-1999 for Ext2 FS0.5b,....
/sbin/mke2fs : Filesystem larger than apparent fily system size
Proceed any way (y,n) y (Given the reply y, manually)
=======================
Linux AGP GART interface v0.03 (c) Jeff Harimann
-- Experimental distribution. only i810 enabled
Got pages for a 64 megabyte mapping for the agp aperature
i810_configureinsmode : /lib/modules: No such file or directory
insmode : No module named uart401.o found in '/lib/modules'
insmode : /lib/modules : No such file or directory
insmode : No module named sb.o found in '/lib/modules'
insmode : /lib/modules : No such file or directory
insmode : No module named opl3.o found in '/lib/modules'
Mounting additional filesystems...
<5>NFS : NFSv3 not supported.
NFS : cannot create RPC transport.
mount : Mounting 192.168.0.254:/lib on /lib failed: Invalid argument
NFS : NFSv3 not supported.
NFS : cannot create RPC transport.
mount : Mounting 192.168.0.254:/usr on /usr failed: Invalid argument
NFS : NFSv3 not supported.
NFS : cannot create RPC transport.
mount : Mounting 192.168.0.254:/bin on /bin failed: Invalid argument
NFS : NFSv3 not supported.
NFS : cannot create RPC transport.
mount : Mounting 192.168.0.254:/opt on /opt failed: Invalid argument
NFS : NFSv3 not supported.
NFS : cannot create RPC transport.
mount : Mounting 192.168.0.254:/home on /home failed: Invalid argument
Setting up loopback device
Building the XF86Config file
Current hostname: ws001
Building the start_ws script
Start syslogd
Starting printer(s): 0
/etc/rc.local: portmap : command not found
/etc/rc.local: inetd : command not found
/etc/rc.local: domainname : command not found
/etc/rc.local: ypbind : command not found
Starting portmapper
/etc/rc.local: portmap : command not found
Starting inetd
/etc/rc.local: inetd : command not found
Setting NIS Server
Setting domainname
domainname ltsp
/etc/rc.local: domainname : command not found
Starting ypbind
/etc/rc.local: ypbind : command not found
INIT: Entering to runlevel :2
INIT: Switching on runlevel : 5
INIT: Sending process the TERM signal
INIT: cannot execute "/tmp/start_ws"
lts.conf
rc.local
