Manuvi,
Turn off LOCAL_APPS. It is broken in ltsp 2.08.
But, you may be in luck. I'm uploading 2.09pre2 to the ltsp download page
as we speak.
Jim McQuillan
[EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
>Hi friends,
>
>After I booted a diskless node under LTSP, X windows is not
>appearing on the screen. Login screen is appearing in the text-
>mode. After getting advice from the group, I have changed the
>Runlevel to 5 in "lts.conf" file when I rebooted the server and
>node, I have got following messages on the screen of the node
>(node configuration is Celron 800, 64MB SD Ram, Intel 810e chip-
>set motherboard,rtl8139 ethernet card) and finally it is halted and giving message
>that
>
>INIT: cannot execute "/tmp/start_ws"
>
>I HAVE ALSO ATTACHED THE lts.conf and rc.local files in this
>message for the reference and for proper guidence. I have activated
>the local applications in "exports" file and the IP of the node is added in
>host.allow
>
>Please suggest me how to overcome this problem.
>
>Regards,
>
>Vinod.
>----------------------------------------------------------
>(Some of the initial messages which appeared on the screen
>were not typed down)
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart : Maximum main mememory to use for agp memory : 27M
>agpgart : Detected an Intel i810 E Chipset
>agpgart : AGP aperture is 64M @ .........
>Linux Net4.0 for Linux 2.2
>Looking up port of RPC 100003/2 on 192.168.0.254
>VFS Mounted root (NFS file system)
>Freeing unused kernal memory 52K freed.
>Init vertion 2.78 booting
>Mounting /proc filesystem
>Creating ramdisk on /tmp
>mke2fs 1.18. 11-Nov-1999 for Ext2 FS0.5b,....
>/sbin/mke2fs : Filesystem larger than apparent fily system size
>Proceed any way (y,n) y (Given the reply y, manually)
>=======================
>Linux AGP GART interface v0.03 (c) Jeff Harimann
>-- Experimental distribution. only i810 enabled
>Got pages for a 64 megabyte mapping for the agp aperature
>i810_configureinsmode : /lib/modules: No such file or directory
>insmode : No module named uart401.o found in '/lib/modules'
>insmode : /lib/modules : No such file or directory
>insmode : No module named sb.o found in '/lib/modules'
>insmode : /lib/modules : No such file or directory
>insmode : No module named opl3.o found in '/lib/modules'
>Mounting additional filesystems...
><5>NFS : NFSv3 not supported.
>NFS : cannot create RPC transport.
>mount : Mounting 192.168.0.254:/lib on /lib failed: Invalid argument
>NFS : NFSv3 not supported.
>NFS : cannot create RPC transport.
>mount : Mounting 192.168.0.254:/usr on /usr failed: Invalid argument
>NFS : NFSv3 not supported.
>NFS : cannot create RPC transport.
>mount : Mounting 192.168.0.254:/bin on /bin failed: Invalid argument
>NFS : NFSv3 not supported.
>NFS : cannot create RPC transport.
>mount : Mounting 192.168.0.254:/opt on /opt failed: Invalid argument
>NFS : NFSv3 not supported.
>NFS : cannot create RPC transport.
>mount : Mounting 192.168.0.254:/home on /home failed: Invalid argument
>Setting up loopback device
>Building the XF86Config file
>Current hostname: ws001
>Building the start_ws script
>Start syslogd
>Starting printer(s): 0
>/etc/rc.local: portmap : command not found
>/etc/rc.local: inetd : command not found
>/etc/rc.local: domainname : command not found
>/etc/rc.local: ypbind : command not found
>Starting portmapper
>/etc/rc.local: portmap : command not found
>Starting inetd
>/etc/rc.local: inetd : command not found
>Setting NIS Server
>Setting domainname
>domainname ltsp
>/etc/rc.local: domainname : command not found
>Starting ypbind
>/etc/rc.local: ypbind : command not found
>INIT: Entering to runlevel :2
>INIT: Switching on runlevel : 5
>INIT: Sending process the TERM signal
>INIT: cannot execute "/tmp/start_ws"
>
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
