James,
You also need the following lines for each workstation in your dhcpd.conf
file in order for the lpp screen to display:
option option-128 e4:45:74:68:00:00;
option option-129 "vga=0x301 console=/dev/tty2";
Hope this helps,
Erick
On Tuesday 30 October 2001 05:26 pm, James Newlin wrote:
> When we added "option log-servers" in the dhcpd.conf the workstation
> continued to boot up.
>
> ----- Original Message -----
> From: "James Newlin" <[EMAIL PROTECTED]>
> To: "LTSP Discuss Group" <[EMAIL PROTECTED]>
> Sent: Tuesday, October 30, 2001 3:32 PM
> Subject: 2.09pre4
>
> > We are sorry if this has already been addressed and answered... We
> > have installed 2.09pre4. Install appeared to be perfect. We are using
>
> RedHat
>
> > 7.0 distro. Workstation boots but stops at the NFS mount saying
>
> "nfsmount
>
> > failed: bad file number" and "NFS: mount program didn't pass remote
> > address!". We must be missing something. Any ideas? We have
> > NFS running and exports shows the correct path names and IP addresses.
> > We
>
> are
>
> > using ISC dhcp 3.0rc12. Our dhcpd.conf has the option root-path
>
> statement
>
> > using "192.168.1.1:/opt/ltsp/i386". Also when we use the lpp kernel,
> > it asks us for a video mode? Any video mode we choose, does not bring
> > up
>
> the
>
> > pretty "LTSP booting" screen. Do we send something in the dhcpd.conf
>
> file
>
> > to set the video mode?
> >
> > Thanks for your time,
> >
> > James
>
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.openprojects.net
--
Acurrus Consulting, LLC
22969 Allen Rd., St. Clair Shores, MI 48080
PH: 810.801.0004
Fax: 810.447.5458
emailto [EMAIL PROTECTED]
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
