You need to start dhcp on just 1 of the Ethernet adapters. Do you have webmin??? (its really easy to do from there)
And if you start from a startup script in init.d its easy too I think when you starting from the command prompt you just pass it some info like Dhcpd eth0 (or you interface name you want to start dhcp on) Check the man dhcpd for more info but I'm sure that's all you need to do Matt -----Original Message----- From: Oliver Krehan [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 22, 2001 2:29 AM To: [EMAIL PROTECTED] Subject: [Ltsp-discuss] Problem using LTSP and DSL Hi all, first I have to say, that I am using Linux now for only two months. Because of this, I am not very good in explaining problems to other and better users. I hope, I can give you a good explanation. I have a problem using LTSP in combination with DSL. First I set up LTSP_2.08 with all the standard parameters in the config-files and everything worked fine. The installation consists of a server with a IBM Fast Ethernet LAN Card and 3 clients, all equipped with Realtek 8139-chipsets. Then I have installed another LAN card for the DSL, a Realtek 8029. The NIC is configured properly and the DSL is running fine. The only problem is using both together. Because DHCP is running, the DSL can not be initialized and vice versa. When I boot up my RedHat Linux 7.0 without DHCP and with no clients attached and then start the DHCP, there is an error message saying, that both adapters use the same subnet. The IP-address of the IBM NIC is 192.168.0.254 and the one of the Realtke is 192.168.0.10. Then I changed the IP from the Realtek to 192.168.1.1. That should also change the subnet. But still it doesn't work. There is also a strange thing which is invoked by how I am starting DHCP. If I start it by just typing in "dhcpd start" then the error message appears and it doesn't start at all. If I start it by changing the directory to /etc/init.d and typing "./dhcpd start" then DHCP is started with no error at all. Now I have the problem that neither LTSP nor DSL is running. I am sure, LTSP will run if I remove the other NIC. Can anybody help me configuring my dhcpd.conf-file for using both NICs on different subnets so I can use LTSP and DSL at the same time ? My dhcpd.conf-file is the same as the example config file given by the LTSP installation, I have only changed the MAC addresses. I don not know, if you need further information for solving my problem, but feel free to contact me, if you do. By the way, the IP-address for the second NIC which is used for DSL is free to choose, because my Provider will give me a new one. Thanks a lot Oliver Krehan _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net