What NIC are you using. Some ISAs need messaging before they work. I know I gave up on using IRQ 10 for my NE2000 NICs and resorted to turning off COM1+COM2 to free up IRQ 3 and 4. If the card has jumpers and you can change the IO, I suggest changing the base IO to 0x280 I have found it to have the least amount of conflicts with other pieces of hardware.
[EMAIL PROTECTED] wrote: > Jim, > > I've read those instructions carefully and completely even _before_ > installing SuSE. The DHCP, TFTP and NFS are running. I've triple > checked. The _ddns_ entry, the definitions for option 128/129 and the > options 128/129 for each terminal are there. Instead of restarting > the DHCP manually after every imaginable change in /etc/dhcpd.conf, > I've even done it the windoze way by rebooting the LTSP server. > > The situation remains the same. After the kernel is loaded it still > protests about not finding the ISA NIC in the workstation. I've also > triple checked the NIC's values for the IO-address and the IRQ with > the DOS utility that came with the NIC. They are correct. > > What can still be wrong? > > Wouter > > On 05-Feb-02 [EMAIL PROTECTED] wrote: > > Sounds like a classic case of forgetting to also include > > an option-128 entry. > > > > Take a look at http://www.ltsp.org/instructions-3.0.html > > > > Jim McQuillan > > [EMAIL PROTECTED] > > > > On Tue, 5 Feb 2002 [EMAIL PROTECTED] wrote: > >> Even though my /etc/dhcpd.conf contains > >> option option-129 "NIC=ne IO=0x320 IRQ=10"; > >> the terminal stops booting after unpacking the kernel, running > >> /linuxrc and mounting /proc with an error stating that option-129 > >> should be used. The system is a SuSE 7.2 with DHCPD v3.0rc4 > >> > >> What could be wrong? > > -------------------------------------------- > Wouter DeBacker ([EMAIL PROTECTED]) > 05-Feb-02 11:06:03 (SuSE Linux Xfmail) > -------------------------------------------- > > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net -- Joseph Kezar _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net