On Thu, 28 Mar 2002 10:08:31 -0700 Andrew Falanga <[EMAIL PROTECTED]> wrote:
> Ok, > > I've got most everything worked out it seems. I know for a fact > that xdm is starting. I've verified this with both netstat and running > a port scan on the udp side of the stack via nmap. In my lts.conf file, > I've added, XDM_SERVER = 192.168.0.10 (this is the actual address of the > server). > > However, when X starts I get the familiar grey screen with an 'X' in > it, and suddenly the screen blacks out. Then after about 30 > seconds, it reappears, and then blacks out again. This continues > indefinitely. So, what am I missing now? Also, in lts.conf, I have > X_MODE_O = 800x600. I saw the entry for one of the other hosts in > the sample file. Given the syntax, and the resolution entry, I > added it just to make sure that the res isn't too much. It's not > too much for the monitor. The monitor is a good, ViewSonic A70, and > the video card has been replaced from the no-name Cirrus Logic chip > set to an ATI Mach64 card. > > So, where do I go from here? > > Andy > Download and install the mach64 server ( http://prdownloads.sourceforge.net/ltsp/ltsp_x336_mach64-3.0.0-0.i386.rpm for the rpm, http://prdownloads.sourceforge.net/ltsp/ltsp-x-xserver-mach64-3.3.6-i386_3.0.0-0_all.deb for the deb and http://prdownloads.sourceforge.net/ltsp/ltsp_x336_mach64-3.0.0-i386.tgz for the tarball) and add: XSERVER = XF86_Mach64 to the workstations config Claas _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
