Andrew Falanga wrote:
>
> Ok,
>
> I've got most everything worked out it seems. I know for a fact
> that xdm is starting. I've verified this with both netstat and running
> a port scan on the udp side of the stack via nmap. In my lts.conf file,
> I've added, XDM_SERVER = 192.168.0.10 (this is the actual address of the
> server).
>
> However, when X starts I get the familiar grey screen with an 'X' in
> it, and suddenly the screen blacks out. Then after about 30 seconds, it
> reappears, and then blacks out again. This continues indefinitely. So,
> what am I missing now? Also, in lts.conf, I have X_MODE_O = 800x600. I
> saw the entry for one of the other hosts in the sample file. Given the
> syntax, and the resolution entry, I added it just to make sure that the
> res isn't too much. It's not too much for the monitor. The monitor is
> a good, ViewSonic A70, and the video card has been replaced from the
> no-name Cirrus Logic chip set to an ATI Mach64 card.
>
> So, where do I go from here?
>
> Andy
This sounds like a font server problem. Make sure you either A)
installed the ltsp_x_fonts package, or B) set up your server's XFS to
allow TCP connections and set the clients to use it.
-David
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
