> Michel,
> this is an amazing tip. will opem the boxes and see what serial
> numbers there are. all the power supplies are 12Vx4.58A, that is less than
> 60W. i'll try to get beefier 12V supply (my car?) and see if the network
> comes back. did you replace the 12V power supply board in the case?
No but I switched a lan troubled Eden board to a case with a well working Eden
board
and the result was the same the troubled lan board was still not working and the
good
one keep's the lan working.
The problem is on the Via Eden Board wich seem's to need more than 60watts to
operate perfectly. I checked the PC Health status in the CMOS setup
and the voltages display was nearly the same on the two systems.
bad board good board
12v 12.19v 12.25v
5v 4.96v 4.93v
2.5v 2.49v 2.46v
Vcore 1.22v 1.21v
interbal vcc 3.26v 3.23v
Michel
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_____________________________________________________________________
Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
For additional LTSP help, try #ltsp channel on irc.openprojects.net
