i just grabbed and tested some older versions of VirtualT that i've
built over the years 1.5, 1.6, 1.7 with gcc versions in the 4.x series
on the raspberry pi and the file menu works, well doesn't work in
exactly the same way e.g. weird file names and the occasional segfault.
i had been using fltk versions in the 1.3.x series in recent years
although I do remember using 1.1.10 at one time so i'll downgrade my
fltk back down to 1.1.10 and see what happens.
bst rgrds
Russell
On 2/11/2018 8:45 AM, Jonathan Yuen wrote:
Hi,
I've been doing this on x86_64 and it hangs on the file menu all the time with
a segfault. I've been trying gcc 6.4.0 and 4.9.4 but neither seems OK.
Jonathan
jonathan.y...@mykopat.slu.se
________________________________________
Från: M100 [m100-boun...@lists.bitchin100.com] för Russell Davis
[rkda...@burninghorse.com]
Skickat: den 11 februari 2018 14:33
Till: m100@lists.bitchin100.com
Ämne: Re: [M100] VirtualT patch (for Ken Pettit really)
the file menu is not great. half the time it segfaults, ok about 80% of
the time it segfaults on the actual load and the filenames can look a
bit weird. but i don't normally do much from the file menu anyway so it
wasn't a big deal for me.
i didn't expect a simple cast to work 100% of the time but googling the
"correct" way to handle the error looked really complicated and was C++
above my pay grade so I took the easiest way out.
bst rgrds
Russell
On 2/11/2018 4:15 AM, Jonathan Yuen wrote:
Hi,
Did it run OK? More specifically, could you load a file? The reason I ask is
that I've played with that error in Flu_DND.cpp and while I can get it to
compile, and it sort of loads OK, but I get errors when I try and load a file.
Haven't really taken it any further.
Jonathan
jonathan.y...@mykopat.slu.se
________________________________________
Från: M100 [m100-boun...@lists.bitchin100.com] för Russell Davis
[rkda...@burninghorse.com]
Skickat: den 10 februari 2018 21:31
Till: Model 100 Discussion
Ämne: [M100] VirtualT patch (for Ken Pettit really)
I was building VirtualT yesterday using gcc 6.3.0 (the default on the
latest raspbian) and got a couple of warnings and errors. fixed them so
that VirtualT would compile cleanly. whether they are "correct" or not I
don't know but everything seems ok. In case anyone or Ken are interested
i've attached a patch file to this email
bst rgrds
Russell
