Resident 3D Printer repair guy here: that’s expensive, you’re looking at .50c in material for an FDM PET print.
It’s about an hour on a Prusa MK3S @ .2mm, I’m fairly certain my buddy gifted me an M200 so maybe I can do some comparison shots. Printer is hot and ready so I’ll just crank out a sample as a reference, wait 2hrs before making any purchases. - Lee - 909.437.0250 - Destroying technology problems. > On Jun 28, 2020, at 20:04, B 9 <hacke...@gmail.com> wrote: > > > Very awesome! One of my M200s is missing the battery cover and looks a bit > janky with the flexible plastic I cut to fit in its place. I got cost > estimates from xometry and shapeways to see how much it'd be and it seemed > the cheapest options were $15 to $20 bucks. For example, here's Shapeways' > prices, but you have to add $3 for black plastic and then there's shipping on > top of that. > > <image.png> > > —-b9 > >> On Sun, Jun 28, 2020 at 7:15 PM Steve Glenner <steveglen...@hotmail.com> >> wrote: >> The M200 I just got was missing the battery cover, so I designed up a >> replacement and 3D printed it. I donate the model to the community in case >> anyone else needs one: https://www.thingiverse.com/thing:4508352 >> >> Tandy Model 200 Battery Cover by SteveGlenner >> I bought a second hand Tandy Model 200, but it was missing the battery >> cover. So here is a replacement battery cover. It should be printed with >> supports as there are some overhangs but otherwise the settings probably >> aren't critical. I printed mine in black ABS so it matches the rest of the >> bottom case. >> www.thingiverse.com >> >>
