RXCMGR is now >1kb I'll look into it, but, the VT100 driver exists in RAM now. Is that the problem? I could not find a way to place the VT100 driver in option ROM. too challenging to understand how to make it work.
On Tue, Jan 26, 2021 at 4:54 AM Jim Anderson <jim.ander...@kpu.ca> wrote: > > -----Original Message----- > > From: M100 [mailto:m100-boun...@lists.bitchin100.com] On Behalf Of > > Stephen Adolph > > Sent: Sunday, January 24, 2021 18:49 > > To: m...@bitchin100.com > > Subject: Re: [M100] updates to REX# Version 2, REXCPM Version 2 > > > > CAUTION External Sender: Do not click links or open attachments unless > > you recognize the sender and know the content is safe. > > > > Glad to hear Jim. Thanks! And thanks for your patience. > > There is one thing. Since the upgrade I've been having some weirdness > with Ultimate Rom II not behaving itself (refusing to open T-Base files, > etc). > > I thought it might have been some residual RAM image corruption left over > from before that was fixed (I keep thinking I had checked or re-created all > my RAM images since then, but always have a nagging feeling that I > haven't...) > > The most easily checked misbehaviour is that if I try to launch UR-2 where > there are only a few kb of space left, I can't exit with F8 - it beeps and > briefly flashes the word "Can't". Have to use Reset to get out of it. > > I won't bore you with all the things I tried, except the last: I thought I > will re-create this RAM image from scratch where I have T-Base files with > my gas receipts and my video collection. Cold reset, check that I can run > UR-2, then fire up TS-DOS to copy the T-Base files into RAM. I run out of > space. This all fit before... > > Cold reset again, check the free space, it's normal. Fire up UR-2, exit. > Free space has suddenly been cut by nearly half, it's now only 16350 > bytes. The only things created in the RAM filesystem are CONFIG.DO which > is the usual size and the UR-2 file to launch the ROM. If I kill those, > free space goes up a little bit but not back to normal. > > I could make a backup, re-init my REXCPM back to v1 build 43 and try this > to verify if you want, but I'm pretty sure it didn't do this before > (although I can't swear to it, I just don't remember having problems with > UR-2 before). As a check I cold reset another machine with REX Classic and > went into UR-2 and as expected, the free space has only gone down by the > size of CONFIG.DO plus a few bytes for the UR-2 launch file. > > > > > > > > jim > >
