Mike, those look very useful, but to know if I can use it in this case I'll need to find a drawing and see what the height is. thanks for the tip!
Steve On Sat, Feb 27, 2021 at 1:32 AM MikeS <dm...@torfree.net> wrote: > Also: > > > https://www.peconnectors.com/component-carriers/hws16187/ > > ----- Original Message ----- > *From:* Stephen Adolph <twospru...@gmail.com> > *To:* m...@bitchin100.com > *Sent:* Friday, February 26, 2021 11:32 AM > *Subject:* Re: [M100] low profile pcb pins > > this is what I am using today. works really well, should have bought > hundreds of them! > > [image: 20210226_112228.jpg] > > On Fri, Feb 26, 2021 at 8:51 AM Stephen Adolph <twospru...@gmail.com> > wrote: > >> Greg, thanks for that, and I hope you feel better soon! >> I counted and I have enough pin headers to build a grand total of 12 more >> REX# NEC/M10. then that's it. >> Steve >> >> On Fri, Feb 26, 2021 at 8:46 AM Greg Swallow <gswal...@mchsi.com> wrote: >> >>> Steve, >>> >>> I should have some of what I use to make system ROM sockets fom T102. Am >>> in VA hospital for a day or two. Took a dizzy fall at work and gotta find >>> out why. Hope to be home by Sat and will dig up what I got and let you know. >>> >>> I believe they were 1x20 @ 2.54mm spacing. No longer in my eBay purchase >>> history. >>> >>> God Bless, >>> >>> GregS <>< >>> >>> Feb 26, 2021 5:55:48 AM Stephen Adolph <twospru...@gmail.com>: >>> >>> Hi folks. >>> I'm struggling to find a good pcb pin for building REX# NEC/M10. >>> >>> I have tried working with those leadframes, but I find it difficult to >>> work with them. I have to file them down so that the pins don't catch, and >>> they don't work on machine sockets either. >>> >>> https://www.te.com/usa-en/product-1544210-2.html >>> >>> >>> Can someone recommend a good low cost low profile solder machine pin? >>> >>> What I have today is absolutely perfect, but I can't find any more. It >>> is a 28 pin DIP header based on machine pins that has a really thin plastic >>> frame. So the module plugs in and sits almost directly flush to the host >>> socket. >>> >>> thx >>> Steve >>> >>> >>> >>>