Is it enabled on both sides? On the modem itself and make sure the last letter of the STAT string in TELCOM is "E" and not "D"
On Mon, Apr 26, 2021 at 8:27 AM Jeff Gonzales <gonzobra...@gmail.com> wrote: > I have XON/XOFF set but it is still getting garbled. > > On Sat, Apr 24, 2021 at 5:25 AM Alex ... <abortretryf...@gmail.com> wrote: > >> Definitely flow control. My 1200 baud Kantronics KPC-3 does the same >> thing in TELCOM if flow control isn't on. >> >> On Fri, Apr 23, 2021, 22:08 Jeff Gonzales <gonzobra...@gmail.com> wrote: >> >>> Hi, >>> >>> I just got myself an ArcaneByte modem. I connected to the fozztexx BBS >>> and posted a message! Not quite as exciting as my first post when I was 9 >>> years old but it was cool getting it set up. >>> >>> The problem is that I can't get the m100 to run at 1200 baud. It skips >>> text and displays garbage sometimes. I slowed the modem down to 300 baud >>> and it works fine. Shouldn't it be able to go faster? I thought the >>> serial port was much faster than the internal modem. It's okay, but I >>> think 1200 baud would be better. >>> >>> Thanks, >>> Jeff >>> >> -- Disclaimer: Any resemblance between the above views and those of my employer, my terminal, or the view out my window are purely coincidental. Any resemblance between the above and my own views is non-deterministic. The question of the existence of views in the absence of anyone to hold them is left as an exercise for the reader. The question of the existence of the reader is left as an exercise for the second god coefficient. (A discussion of non-orthogonal, non-integral polytheism is beyond the scope of this article.) Thanks /usr/games/fortune
