Yes, but I will try it again at 600 baud of that is the max TELCOM can do with the screen.
On Mon, Apr 26, 2021, 2:46 PM Alex ... <abortretryf...@gmail.com> wrote: > Is it enabled on both sides? On the modem itself and make sure the last > letter of the STAT string in TELCOM is "E" and not "D" > > On Mon, Apr 26, 2021 at 8:27 AM Jeff Gonzales <gonzobra...@gmail.com> > wrote: > >> I have XON/XOFF set but it is still getting garbled. >> >> On Sat, Apr 24, 2021 at 5:25 AM Alex ... <abortretryf...@gmail.com> >> wrote: >> >>> Definitely flow control. My 1200 baud Kantronics KPC-3 does the same >>> thing in TELCOM if flow control isn't on. >>> >>> On Fri, Apr 23, 2021, 22:08 Jeff Gonzales <gonzobra...@gmail.com> wrote: >>> >>>> Hi, >>>> >>>> I just got myself an ArcaneByte modem. I connected to the fozztexx BBS >>>> and posted a message! Not quite as exciting as my first post when I was 9 >>>> years old but it was cool getting it set up. >>>> >>>> The problem is that I can't get the m100 to run at 1200 baud. It skips >>>> text and displays garbage sometimes. I slowed the modem down to 300 baud >>>> and it works fine. Shouldn't it be able to go faster? I thought the >>>> serial port was much faster than the internal modem. It's okay, but I >>>> think 1200 baud would be better. >>>> >>>> Thanks, >>>> Jeff >>>> >>> > > -- > Disclaimer: Any resemblance between the above views and those of my > employer, my terminal, or the view out my window are purely coincidental. > Any resemblance between the above and my own views is non-deterministic. > The question of the existence of views in the absence of anyone to hold > them is left as an exercise for the reader. > The question of the existence of the reader is left as an exercise for the > second god coefficient. (A discussion of non-orthogonal, non-integral > polytheism is beyond the scope of this article.) Thanks /usr/games/fortune >