Hi Guys, I hope it's OK to resurrect an old email thread. My DVI Gotek is still working well with my T102, but I've added a T200 to my collection and I'd like to add a disk image for the T200 onto the Gotek. I still haven't figured out how to create a disk image, so if anyone can help to either describe how I can create a disk image from the T200 DVI floppy disk, or if anyone already has a T200 DVI disk image file that they could supply, then I'd be very grateful! -Gary
________________________________ From: Gary Wilkinson <gpwilkin...@hotmail.com> Sent: 08 May 2023 15:21 To: m...@bitchin100.com <m...@bitchin100.com> Subject: Re: [M100] Adding Gotek to T100 Disk Video Interface No, I think it was my fault. I missed out the “ [m100dvi]” you listed at the start of the FF.CFG file on your email Josh. I’m currently making a couple of blank images now to hold saved data & basic program. Thanks again for your help! Sent from my iPhone On 8 May 2023, at 15:53, Josh Malone <josh.mal...@gmail.com> wrote: I suspect the issue may be cskew=1 which is missing from my CFG. Grimakis is also using interface=shugart (vs. mine using 'ibmpc') so that will require the different drive number jumpering (effectively swapping 1 and 0 -- LFILES 0 might have worked) Yeah, everyone should use Grimakis's files and ignore what I posted :) -Josh On Mon, May 8, 2023 at 10:45 AM Gary Wilkinson <gpwilkin...@hotmail.com<mailto:gpwilkin...@hotmail.com>> wrote: Success!!!! I copied the CFG files from Grimakis GitHub and they worked!! I’ll now puzzle back and see what I had missed in my original CFG files, but for now I’m really delighted to have it working. Thanks guys for all the help!! Sent from my iPhone On 8 May 2023, at 15:37, Gary Wilkinson <gpwilkin...@hotmail.com<mailto:gpwilkin...@hotmail.com>> wrote: I checked my CFG files and they match and I made sure to keep the file name the same on the img file you provided, but I’m still getting an error. When I just have the Gotek drive installed I get the error “In Drive0 is NOT a SYSTEM DISKETTE” If I configure the Gotek as drive 1 and boot from the floppy, I’m ok until I try and do a directory of drive 1 (LFILES 1) and then I get the error “?AT Error” Puzzling 🙁 Sent from my iPhone On 8 May 2023, at 14:51, Josh Malone <josh.mal...@gmail.com<mailto:josh.mal...@gmail.com>> wrote: On Mon, May 8, 2023 at 7:42 AM Gary Wilkinson <gpwilkin...@hotmail.com<mailto:gpwilkin...@hotmail.com>> wrote: Hi Josh! It was your YouTube video that inspired me to try this! I asked a question in the comments, but I think you use a streaming service and so must have missed it. I’ve been updating my comments as I go along so others have an idea how to set this up. Thanks for the initial inspiration and for responding in here :) Ah, yes - The "Amigos" folks re-post (with my permission) many of my live Twitch streams to YT and, of course, I don't get notified of comments there. I should probably come up with a way to fix that. -Josh
