I've been trying to create a new drive image file for use with my PC Compatibility Card. I've tried to create one while initializing it. DOS can't see the drive. I then tried to make one without initializing the drive. DOS will format it, but only 255MB out of 1024MB.
I'm using PCSetup 2.1.7 on a modified 7200 case/7300 CD-ROM and case badge/8500 logic board. :) It is running 9.1 with 160MB RAM, a 604/180mhz processor, 2 x 1GB SCSI drives and an external Seagate 9GB 68-pin SCSI with a 68-50 pin adapter.
Any suggestions? I'm thinking of reverting to PC Setup 1.6.4 - I have no interest in running Windows on it at the moment.
Use one of the emulators to make the dos disk image, mount it as D: in the emulator to check it.
Config the pc card to use it as C: and boot/fdisk/format the image from a floppy.
Just a suggestion to try. If it doesn't work I'd suggest replacing pcsetup, once more with 2.1.7 before you go back to 1.6.4 which is not really on the cards with 9.1 anywho.
What card are you running and whats the boot disk windoze version?
-- Mac-N-DOS is sponsored by <http://lowendmac.com/> and...
/ Buy books, CDs, videos, and more from Amazon.com \ / <http://www.amazon.com/exec/obidos/redirect-home/lowendmac> \
Support Low End Mac <http://lowendmac.com/lists/support.html>
Mac-N-DOS list info: <http://lowendmac.com/lists/mac-n-dos.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/mac-n-dos%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
