On 11/05/17 14:19, Mike Cinquino wrote:
This is Machinekit not Linuxcnc, make sure you are running the correct system or there is no point going into this The sim works fine as per this thread, https://groups.google.com/forum/#!msg/machinekit/8mMHqZ_Zb80/onJM1rvsBAAJ;context-place=forum/machinekit
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout. |
- [Machinekit] hb04 Pendant integration Mike Cinquino
- Re: [Machinekit] hb04 Pendant integration schoone...@btinternet.com
- Re: [Machinekit] hb04 Pendant integrati... Mike Cinquino
- Re: [Machinekit] hb04 Pendant integ... schoone...@btinternet.com
- Re: [Machinekit] hb04 Pendant i... Mike Cinquino
- Re: [Machinekit] hb04 Pend... schoone...@btinternet.com
- Re: [Machinekit] hb04 ... Mike Cinquino
- Re: [Machinekit] h... schoone...@btinternet.com
- Re: [Machinekit] h... schooner30@btinternet
- Re: [Machinekit] h... Mike Cinquino
- Re: [Machinekit] h... Mike Cinquino
- Re: [Machinekit] h... schoone...@btinternet.com