Thank you. That may be the problem as I am using "linuxcnc" at the command prompt to launch. This is an older image I am using. It seemed to me that "machinekit" to launch did not work. I will have to check again.
On Thursday, May 11, 2017 at 9:49:38 AM UTC-4, Schooner wrote: > > > On 11/05/17 14:19, Mike Cinquino wrote: > > Hello, > > I am attempting to use a USB hb04 pendant. This is the hard wired USB > version 18 keys. I can't find any other model info or part numbers for this > unit. > > I have verified that the pendant is being seen by using the lsusb command > and finding the expected id value. > > To start I am trying to get it to work in sim by using the prepackaged sim > configuration unmodified. I select it from the tree after launching > linuxcnc. > > I am running linuxcnc version 2.7.0 pre.... (I am going from memory on > this.) > > > This is Machinekit not Linuxcnc, make sure you are running the correct > system or there is no point going into this > > The sim works fine as per this thread, > https://groups.google.com/forum/#!msg/machinekit/8mMHqZ_Zb80/onJM1rvsBAAJ;context-place=forum/machinekit > > > I am using the Xylotex BeagleCNC BBB_DB25/26 cape. (Not that it matters as > I am working in sim) > > After I select configuration and LCNC tries to load.. I see it going > through multiple ports and it ends up not finding it. > > I followed the instructions on the read me file and added the recommend > .rules file to udev directory. Still no luck. > > Not sure what to try next. > > Any help would be greatly appreciated. > > Thanks, > Mike > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+...@googlegroups.com <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
