Hey Schooner, I bet you are right, I was using a pre-build Beagle Bone Black image of and the headers were missing there. I'll install the other packages and I bet that will clear things up so when I get a chance to give that a shot I'll let you know if that solved the problem.
I can add you to the repository, It will be public once it's stable and there at least some type of documentation for getting it up and running Thanks, Travis On Sunday, September 23, 2018 at 5:53:15 AM UTC-4, Schooner wrote: > > Had a look at the forum thread in linuxcnc, sounds interesting. > > There is obviously a github repo somewhere you have shared with Michel > Wijnja > > If you would like to do the same, I will be happy to test build. > > > On 23/09/18 07:11, schoo...@gmail.com <javascript:> wrote: > > HI Travis, > > I will be interested to have a look at this later. > > The includes you want should be in the flavor package > > > https://github.com/machinekit/machinekit/blob/master/debian/machinekit-rt-preempt.install.in#L4 > > We don't have a -dev package and each kernel has a specific sub package > which also contains the includes etc. > > I suspect you may have just installed machinekit, whereas you need 'apt > install machinekit machinekit rt-preempt' for instance. > > I will check the package contents later, but see no reason why those would > be missing. > > regards > > On 9/22/2018 8:07 PM, Travis Gillin wrote: > > I'm working on a GUI that's meant for embedded applications with fairly > low resources. It's C and C++ based and runs entirely without X, deals > directly with the framebuffer and evdev for mouse & keyboard. (Touchscreen > also supported) > > I have a post here about it > https://forum.linuxcnc.org/41-guis/35225-new-gui-for-embedded-systems. I > posted here to figure out how to talk to LinuxCNC via C (libNML) and this > has all been figured out most part. My trouble now is when I try to build > against machinekit, there is no /usr/include/linuxcnc. (or > /usr/include/machinekit either) Specifically I need "<linuxcnc/emc.hh>" & > "<linuxcnc/emc_nml.hh>" equivalents for MachineKit. I know this project was > forked a while ago but I believe the NML interface is the same. Could > someone here point me in the right direction? > > Right now the GUI runs on LinuxCNC on a regular Intel-based PC just fine > and the only hang-up in migrating to our ARM platform is this little > difference between LinuxCNC and Machinekit. > > I think this GUI will be a great addition to this project because it will > allow people to use HDMI or virtually any type of display from Beagle Bone, > Rasp Pi, or other embedded devices that Machinekit has been ported too and > not have the "click and wait" lag. > > Thanks, > Travis > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+...@googlegroups.com <javascript:>. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > > > > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
