@Justin Do you have a schematic available for your board ? On Wednesday, 28 August 2019 20:53:41 UTC+2, Michael Brown wrote: > > Yes > It would certainly help my debug efforts here to have the physical > board(s) on hand. :-) > > I can PM you my street address when you have it build t and ready... > > On Wednesday, 28 August 2019 03:54:49 UTC+2, justin White wrote: > > After looking at it I wonder if it is not just the 8i20 portion of SSerial > code has issues. I'm sort of at a loss as I'm not really sure what I'm > seeing. Like I said, if you want I can whip you up a board and send it to > you on the next run if you want to debug this further. I just don't want to > give you bad info since I'm not totally sure I understand why I'm getting > the results I'm getting. > > > On Tuesday, August 27, 2019 at 8:26:00 PM UTC-4, justin White wrote: > > New deb is still not working for SS although there is a minor change that > I did not see before. the card status light will blink once, then fault, > then status will blink again and fault. Previously the status light only > lit one time. > > On Tuesday, August 27, 2019 at 7:31:34 PM UTC-4, justin White wrote: > > It would certainly be nice to build firmware with docker with the Quartus > fixes you've made to the DExx_cramps config, in case I come up with some > other hardware. > > On Tuesday, August 27, 2019 at 5:41:28 AM UTC-4, Michael Brown wrote: > > That PR is waiting for the finalizing your pin file: > > ...
-- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/0f364457-56d4-4655-9f9b-91712292ea25%40googlegroups.com.
